Imagine yourself purchasing a new Kimber 1911 handgun and encountering a number of issues, such as failure to feed, failure to return to the charge, jamming, and others.
But your new Kimber 1911 keeps jamming, despite your human efforts to fix some of the problems. What could possibly go wrong, and how would one go about fixing such a problem?
Start by checking the slider or magazine for any dirt. Then carefully lubricate it. Shooting more than 150 or 200 rounds may be necessary to resolve the problem. Altering the kind of ammunition is also advised.
So, read this post all the way through to find out how to fix Kimber 1911 jamming problems.
Steps To Troubleshoot a Kimber 1911 Jamming Problems
It’s a very typical problem that people frequently suffer after buying a new 1911, according to the majority of Kimber 1911 users and even some gun experts.
Typically, when individuals have a jamming issue, their first assumption is that there is an issue with the ammo or the lubricant that is causing the ruckus.
However, other conceivable causes might result in a similar issue in addition to filthy mags, sliders, or low-grade ammo.
The good news is that there are a number of internet mending tips and techniques, however not all of them may work reliably and effectively for your Kimber 1911.
I will now describe a quick, simple, and economical solution to fix the jamming issue with your Kimber 1911:
Step 1: Feed Ramp Polishing
One of the main causes of jamming is failure to feed. A new handgun has problems making good contact with the ammo or a cramped feed ramp.
People encounter no issues after 400 or 500 rounds for this reason. Thus, cleaning the feed ramp will aid in resolving the problem.
Step 2- Clean and Lubricate it Thoroughly
Just keep in mind to field strip clean, and keep it properly lubricated every 100 to 150 rounds throughout the break-in time.
Due to widespread complaints, the 1911 handgun glitches four times out of every 100 shots. The issue could be solved by lubricating and cleaning.
Step 3- Shoot More Than 400 Rounds:
Weapons with metal frames, like the Kimber, have fittings with precise tolerances. They occasionally need to be more fluid. More than 400 rounds fired will aid in smoothing down those feed ramps.
Step 4-Change the ammunition/Use full metal jacket (FMJ) ball ammunition
Ammo may be the issue. The slide will not pull back far enough to reveal the next cartridge that is waiting in the magazine if the power level of the ammunition is too low for the recoil spring of choice.
Instead, the slide will return to battery empty. Try a new magazine and other ammo, then examine how the shooter is holding the pistol and fires a lot more ammunition through it (it can take 500 rounds for a tight gun to wear in).
Step 5- Stretch the Spring:
For the slide to remove the round, the magazine frequently presents it incorrectly.
It can be that the magazine lips are formed incorrectly, the spring isn’t strong enough (extend the spring to rectify this), or the magazine isn’t entirely placed into the frame (it must click into place…judiciously use the palm of the hand like a hammer to seat the mag).
It will be advised to give a different magazine a try.
Step 6: The Plunk Test:
- Remove the barrel and hold it upright with the chamber up and the muzzle down.
- In the chamber, drop a loaded bullet. Pay attention to the characteristic plunk sound made when the brass case hits the steel chamber ledge.
- Push the cartridge as far forward as it will go while rotating it. It ought should turn effortlessly. If not, your bullets may not be placed properly, the barrel may be too short, or the chamber may be too small. Use a variety of your cartridges to do this test.
Warning:
Such troubleshooting activities might be dangerous to attempt if you lack the necessary knowledge. So, before using, maintaining, or troubleshooting your Kimber 1911, always remember to read the instruction handbook. It is also advised to seek out Kimber’s help or a gunsmith.
Watch this video: https://www.youtube.com/watch?v=D4WJcsvlJJs
Frequently Asked Questions (FAQs)
Why do 1911s jam so much?
Because 1911s must adhere to extremely strict specifications throughout manufacturing and machining. Besides, when you ‘polish’ the feed ramp, you’re really removing material that pushes the gun outside of specification and causes it to jam.
What is so special about a 1911 pistol?
The Kimber 1911 series of pistols is renowned for its ergonomics.
How many rounds does 1911 have?
Kimber 1911 is a single-action, short recoil-operated, semi-automatic handgun that is chambered in the M1911 (commonly referred to simply as 1911). 45 ACP. It has an effective range of around 50 meters and a 7-round magazine.
Does Kimber make a good 1911?
There are several excellent 1911s available, but the one made by Kimber is one of the best.
What ammo is best for 1911?
Although certain 1911-style handguns are reputed to be particular about the ammunition they fire, the best and most dependable ammunition f 1911 is frequently brand-new manufacturer full metal jacket, or FMJ, ammunition.
Are 1911s prone to jamming?
You have every reason to worry about such things. 1911 is infamous for regularly jamming.
How many rounds does it take to break in a Kimber 1911?
Firing 100 to 150 rounds of premium FMJ ammo at the range is recommended. After that, users should once again clean and lubricate the firearm before firing 400 to 500 rounds through it.
Is Kimber 1911 a good home defense?
Every bullet counts in a home defense scenario, and the 45 ACP cartridge has great stopped capability.
Conclusion
After purchasing a new Kimber in 1911, consumers regularly complain about problems. Jamming is the most frequent problem with them.
The essential point is that having such problems is not always anticipated. Before purchasing a semi-automatic handgun like the Kimber 1911, you must be aware of the advantages and disadvantages as well as any potential issues.
You could also know how to solve such issues in order to avoid the inconvenience outlined in today’s post.
Remember, you can only solve a jamming issue with a Kimber 1911 and other associated problems to your satisfaction if you carefully follow all the instructions.
Sources:
- https://www.1911forum.com/threads/new-kimber-jamming-issues.234989/
- https://www.thefirearmsforum.com/threads/kimber-jamming-issues.38750/
- https://www.kimbertalk.com/threads/new-kimber-ultra-carry-jamming-and-will-not-shoot-reloads.69712/
- https://www.kimbertalk.com/threads/jammed-up-9mm-1911.66900/
Related Posts:
