7 Smith and Wesson 460 XVR Problems You Might Experience

The Smith & Wesson 460 XVR is the most adaptable huge bore revolver in the world and an excellent large game hunting revolver. The X-Frame, the company’s biggest and strongest frame, serves as the foundation for the revolver.

Despite its excellent features, there may be some potential downsides to this gun.

Cleaning problems, bullet case jamming, accuracy issue, difficult extraction, jammed trigger, cylinder not rotating, and flame cutting are some of the most common Smith and Wesson 460 XVR problems.

In this article, I’ll go through the most usual Smith & Wesson 460 XVR problems. Let’s now explore a few of this revolver’s characteristics and features.

Features & Specifications of Smith and Wesson 460 XVR Gun:

Smith and Wesson 460 XVR Specs
Cartridge	.454 Casull .45 Colt .45 Schofield .460 S&W Magnum
Capacity	5 Rounds
Barrel Length	8.38 Inches
Weight	60.7 Ounces or 1720.81 Grams
Length	15.0 Inches
Type	Double-Action or Single-Action
Grip	Synthetic
Muzzle Velocity	2100 Feet Per Second
Sights	Front – Red Ramp, Interchangeable Rear – Adjustable White Outline

Common Smith and Wesson 460 XVR Problems and Solutions

In this article, I’ll tell you about a few common Smith & Wesson 460 XVR troubleshooting techniques. Let’s take a quick look at these problems and their remedies.

Quick Overview of the Problems and Solutions

Problems with Smith and Wesson 460 XVR	Solutions
Cleaning Issues	Follow the cleaning method.
Bullet Case Stuck Inside the Cylinder	Clean the cylinder.
Accuracy Issue	Adjust the recoil and use lighter ammo.
Difficult Extraction	Clean, lubricate, and use less straining ammo.
Jammed Trigger	Replace the trigger rebound spring.
Cylinder Doesn’t Rotate	Clean the cylinder.
Flame Cutting	Use A2400.

1. Cleaning Issues:

You could get a lot of carbon or fire burns onto the front of the cylinder after firing this revolver several times. Even after thoroughly cleaning the revolver, the stain can remain.

After around 200 shots, the compensator might become quite dirty. It becomes quite hard to clean the compensator. And using a dirty gun might lead to a lot of unforeseen problems.

The Fix:

Although with stainless steel ones, this problem is really obvious. Lead-away cloths might help to lessen the stain. But try to exercise precaution when using this fabric since using the cloth excessively might severely destroy the finish.

You can get the lead-away cloth from Amazon.

Remove the compensator from the pistol before cleaning it. Then clean it with a brush and a suitable solvent. However, the procedure is a little chaotic.

The use of an ultrasonic gun cleaning tub is recommended to clean it properly. Alternately, you might use a drill that fits exactly within the gun’s barrel and has a whippet fragile bit.

2. Bullet Case Stuck Inside the Cylinder:

Sometimes the bullet casing became trapped within the revolver’s cylinder. It creates a significant challenge in difficult situations.

The revolver cylinders’ forward portion is where the issue primarily manifests itself. If you don’t frequently clean your gun’s cylinder, you’ll undoubtedly run into this kind of trouble.

The Fix:

The primary solution is to clean the cylinder of your guns. Before going hunting, put forth the effort to thoroughly clean your revolver.

You should also change your ammunition from time to time. That can be the remedy for avoiding this issue.

3. Accuracy Issue:

Some customers complained that the revolver’s accuracy is disappointing as they encountered it when firing. The gun’s recoil may be the cause of this problem. Sometimes, the heavy recoil results in this sort of circumstance.

A heavy bullet may also lead to this issue. While shooting, a heavy bullet has a low velocity. This makes aiming and shooting difficult.

The Fix:

Make your revolver’s recoil less intense. This sight problem can be resolved by adjusting the recoil.

If you plan to shoot at close range, pick lighter ammunition. Additionally, if you are utilizing heavy ammunition for long-range targets, the sight issue won’t be a problem.

4. Difficult Extraction:

For the shooters, a major problem is a tough extraction during a crisis. An extraction issue might develop as a result of an infrequent cleaning, particularly before hunting.

High pressure might also cause difficult extraction. This revolver’s extraction problem may be caused by choosing the incorrect cartridges.

The Fix:

Use the right cleaning techniques on your revolver, and don’t forget to lubricate. It is best to bring a cleaning kit while hunting.

It is best to select several types of ammunition for the revolver. Then pick the correct ammo that won’t mess with extraction. Also, choose the one that won’t put too much strain on the revolver.

5. Jammed Trigger:

Another issue with this revolver that has been mentioned is the trigger stalling. You will experience this problem most often while using the double action mode.

The revolver’s trigger rebound spring may occasionally cause an issue. In addition to all of this, insufficient cleaning might contribute to this issue.

The Fix:

Try to determine whether the trigger performs better in single action mode. If you are unable to resolve this, consider contacting a nearby gunsmith.

To enhance the trigger’s condition, replace the revolver’s trigger rebound spring.

6. Cylinder Doesn’t Rotate:

The cylinder occasionally fails to rotate during firing. This problem could cause you to take longer when shooting, which is bad.

This use is quite tough for novices to manage.

The Fix:

Firstly, take the revolver’s cylinder out. Contact an expert on this if you don’t have enough knowledge of it. Alternatively, you may watch this video on removing the revolver’s cylinder.

After thoroughly cleaning the cylinder, recheck it and replace the cylinder in its former place.

7. Flame Cutting:

Sometimes, the revolver may suffer flame-cutting damage. This is extremely damaging and will seriously harm your revolver.

When a bullet is discharged, high-velocity gases start to breach the area right above and directly in front of the cylinder.

The Fix:

If it is dealt with right away after being identified as a problem, flame cutting is typically not a concern.

If you’re a hand loader, you can reduce it by using A2400 instead of H110 or W296. This will lessen the revolver’s extremely high heat and pressure.

Top 3 Alternative Guns of Smith and Wesson 460 XVR

Here are some best alternatives for the Smith and Wesson 460 XVR:

1. Taylor’s & Co 1873 Cattleman Revolver

• Six grooves on an army-size grip.
• Case-Hardened Forged Frames with Blued Steel Finish
• Single action revolver that can hold six rounds.

2. Model No. 3 Schofield .45 LC

• Has a 7-inch barrel and six-round capacity
• Fixed sight with walnut grip.
• Case-hardened finish with blue color.

3. 1875 Schofield 2° Model

• Fxed sight with six round fluted cylinder.
• Two-piece walnut grip with forged steel barrel and frame.
• It features a blue finish and case colored hammer

Frequently Asked Questions (FAQs)

Conclusion

For hunting, the Smith & Wesson 460 XVR revolver is a fantastic choice for both novices and intermediate shooters. Despite all of its shortcomings, it is still a superb decision.

The most typical issues with this weapon are listed in this article. Carefully follow my suggestions to get your Smith and Wesson 460 XVR problems fixed.