Kimber Micro 380 Problems You Should Know

If you’re searching for a tiny gun that’s comfortable, accurate, and most importantly, economical, you’ve definitely come across the Kimber Micro 380. Even if it is a strong piece of work, there is a significant possibility you may encounter some typical issues.

Some of the most common Kimber Micro 380 issues include failure to feed, stovepiping, failing to shoot, gun breaking up and the gun getting locked.

So, if you stick with me to the finish, you’ll have a decent idea of how to approach and solve various difficulties. But, before we go into the problem, let’s look at the gun’s specs.

Features & Specifications of Kimber Micro 380 problems:

Height4.0 inches
Weight13.4 ounces
Barrel Length2.75 inches
Capacity7 rounds
Caliber.380 ACP
Common Kimber Micro 380 Problems
Kimber Micro 380

Common Kimber Micro 380 Problems and Solutions

Quick Overview of the Problems and Solutions

Fails to feedInstall different spring/change magazine/send it to Kimber
Failing to loadReplace the slide lock lever and do not touch the slide lock when firing
Broken gunSend to Kimber for repair
Unpleasant gripInstall custom grip
StovepipingSweep the bullet off, make some hard tap on the sides

1. Fails to feed:

Failure to Feed or FTF is a very common problem in this gun. There are many disgruntled customers fuming over this issue on the internet. If online platforms are taken into account more the 50% of people faced the same issue.

There is also a common pattern that most FTFs face during the break-in period. Despite the fact that this is a frequent problem throughout the break-in stage. If it continues, you should take action.

The Fix:

First, try replacing the magazine as stock Kimber magazines are known to cause this problem. The Wilson Elite Tactical Magazine is usually the most recommended one to replace the stock Kimber magazine.

If that doesn’t work, replace the recoil spring. Replacing the recoil spring is quite an easy task. Check this video on YouTube for a full tutorial on how to replace the recoil spring.

If it does not cure the problem, send it to Kimber for repair because it isn’t much you can do.

2. Failing to Load:

There have been a few incidents of Micro 380 failing to load. Even though the problem is not widespread as failure to feed but it requires great attention. Especially, if you use it as a personal defense weapon.

The slide lock on this gun has been accused of causing this problem. Sometimes the issue would lie with magazines. So, you will need to do a thorough check on both if you do not wish to face this problem.

The Fix:

The problem is that the slide locks in some Micro 380s are extended and not polished. These slide locks often in these pieces cause the problem by interfering with the slide. It interferes with the slide when the gun is auto-loading. 

Once the size of the slide lock is brought do so it can not interfere, the problem was gone.

In case the slide lock is not the problem then you should focus magazine. Try switching to a different magazine to see which one fits best.

3. Broken Gun:

There were claims about the gun that the slide unexpectedly jammed up halfway open. It gets stuck so hard that it only moves forward about halfway.

This happens when a fragment of slide material gets broken off on the left side of the breech face and lodges itself between the barrel feed ramp and the frame.

This way the internal component failure prevents the slide from moving forward.

The Fix:

This problem happens due to multiple internal components failure. There is not much an average user can do about it. The best course of action is to send the gun for repair to Kimber.

4. Unpleasant Grip:

This gun’s front strap of the grip is quite smooth, which might cause issues. The smooth portion works against you while dealing with the recoil. During the kickbacks of recoil, it can get hard to handle it.

In the worst case, the gun can slip if the palm is sweaty or the grip is not tight.

If you have a sweaty palm, not wearing gloves may make things difficult. Even though this problem could have been solved by adding some serration for some reason Kimber did not go ahead.

The Fix:

The ideal approach to solve this problem would be to install a bespoke front strap. Doing so would give your hand something solid to grip onto. So, recoils would be under control.

Another solution could be using a shooting glove. If the primary usage of the gun would be hunting, sports, and recreation then wearing gloves would be a viable solution.

5. Stovepiping:

Stovepiping is an annoyance that you may encounter with the micro 380. Stovepiping occurs when a bullet shell becomes trapped in the slide perpendicularly. However, there is a simple solution to this difficulty.

Stovepipes can be caused by a malfunctioning or faulty extractor or ejector, or when the shooter does not grip the firearm firmly enough for the action to work entirely, a condition known as limp wristing, or by reloads that are not strong enough to properly cycle the action, among other things.

The Fix:

Stovepipes can be produced by a defective or faulty extractor or ejector. Or when the shooter does not grasp the firearm firmly enough for the action to work completely, a situation known as limp wristing. Or by reloads that are not powerful enough to effectively cycle the action.

After clearing the stovepipe, tap the back of the pistol slide to check the slide is in battery, then shoot the handgun normally.

User Feedback on Kimber Micro 380

The Kimber Micro is a well-executed ultra-compact pistol with rough surfaces where you need them for purchase and gently rounded metal edges where they can cause blisters during a long training session.

A thread on kimbertalk consists of users sharing their experiences. The general sentiment toward the gun is more or less similar. Overall most users are satisfied with its performance considering the response from them on different platforms over the internet.

This handgun comes with a plethora of attachments that allow you to modify your weapon to match your specific demands and requirements.

The Kimber Micro 380 is a strong and dependable pistol that will serve you well in dangerous situations. It’s an excellent choice for concealed carry, home protection, and leisure shooting.

Frequently Asked Questions (FAQs)

Is Kimber Micro 380 a good gun?

The gun is accurate, the trigger pull is smooth with a rapid reset, and the sights are simple to use in any lighting condition.

Does Kimber make a 380 auto?

The Kimber Micro Two-Tone is a perfect size and weight for a semi-automatic handgun that can yet produce well-placed, controlled fire with an appropriate defensive round.

Is the Kimber Micro 9 any good?

The Kimber Micro 9 not only looks excellent, but it also provides a superb shooting experience at the range. The handgun is really easy to use, and the accuracy appears to be excellent.

Is Kimber Micro 380 single or double action?

In a small 1911 in many ways, one of the most significant Micro design benefits is a single action trigger with the type of short, smooth pull that ensures accuracy and inspires trust.

Does Kimber Micro 380 have a safety?

The Kimber does have an external safety.

How many rounds does a Kimber 380 hold?

It can hold 7+1 rounds.


A problem-free pistol does not exist, and the Kimber Micro 380 is no exception. The comfort, precision, and performance distinguish it from the competition.

The handgun gets buttery smooth after the break-in period. And the bulk of the troubles you’ll run into with this rifle are straightforward to fix.

Kimber Micro 380 problems may be resolved with little effort. And after these difficulties are rectified, you’ll see why it’s regarded as one of the elites.

Related Posts:

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts