Kimber solo has been discontinued in 2017. This is a gun that has made much controversy over its performance. People have been debating for and against it since it got released.
Kimber solo has its ups and downs. When it comes to Kimber solo problems, you are likely to face failure to eject, failure to feed, poor quality control, unreliable feeding, and a bunch more.
But, for some people, it works flawlessly. So, in this post, I’ll be preparing you to face the problems most common to this gun if you happen to be unlucky. Once you have read till the end, you will have a better understanding of how to handle which problem.
Features & Specifications of Kimber solo:
|Type||Single Action striker-fired|
|Sight||Fixed 3-dot (white) low profile|
Common Kimber Solo Problems and Solutions
In this section, we will be looking at some of the common problems of Kimber’s solo problems and how to solve them.
Quick Overview of the Problems and Solutions
|Failure to go into battery||Change magazine, user proper ammo|
|The slide does not lock after the last round||Require internal polishing, send to Kimber if the problem persists|
|Poor quality control||Check the gun thoroughly before purchase|
|Failure to eject||Polish and lube internal parts and the ramp|
|Unreliable feeding||Change magazine, send to Kimber if the problem persists|
1. Failure to Go Into Battery:
The bullets often fail in Kimber solo to go into the battery at the first chance. There could be more than one party at fault for this incident to happen. But, most of the time it is the magazine or the ammo.
Often times the failure to feed is caused by the magazine. So, the first thing you should do is to change the magazine.
If the problem persists, try changing to recommended ammo. If that does not solve the problem then send the gun to Kimber for repair.
2. Slide Does Not Lock After the Last Round:
The same user who faced failure of rounds to go into battery, also stated that the slide does not lock after the last round has been fired. This problem occurs due to design issues.
There is not much for you to do when problems occur due to design issues. The best thing you can do is to send the gun to the manufacturer and tell them to make it work.
3. Poor Quality Control:
There are many people on both sides of the fence when it comes to Kimber solo. Some say it works flawlessly and some say it is a piece of garbage.
From the opinion of the internet, it seems that Kimber had some quality control issues with this gun.
Before you make the purchase check the gun thoroughly if everything seems fine. Also, send it directly to Kimber if you notice any anomaly.
4. Failure to Eject:
The user aliased oldskeetshooter on defensivecarry.com same this problem. It was due to some design problem with the ramp which prevented the case ejection.
He says during the process of removing a round from the mag to be chambered, the Solo slide just clears the back of the cartridge. All of this, along with strong recoil spring, will result in failures.
He also came up with a fix. After a little stoning and polishing the ramp his solo worked fine. You could try lubing internal parts if stoning the ramp does not work.
5. Unreliable feeding:
The feeding mechanism in this gun is unreliable. This YouTuber completed the break-in period yet afterward the feeding continues to become unreliable.
He sent it back to Kimber, and when he got it back the same problem persisted. The root cause is assumed to be a design flaw.
There is no solution that guarantees success. You can try changing the magazine. If that does not work then send it to Kimber for repair as soon as possible.
User Feedback on Kimber’s solo
When it comes to Kimber solo it seems people have mixed reactions. Some claim it is smooth and flawless whereas others say troubles just won’t stay away.
He says it depends on who you are as this gun is a hit or miss. There are users to send their guns to Kimber numerous times and it is still unreliable. On the other hand, there are people for whom the gun works flawlessly.
Another user backs that statement on the same site saying, “Mine was incredibly reliable. Every load you could think of from 115-147gr. There are good ones and bad ones. Sad that is the case, but it is. Bought mine off a friend that let me shoot it first with my ammo. Most people aren’t that lucky.”
So, basically, this is a hit or miss. On top of that, as Kimber discontinued this model, it does not shade the gun in a good light.
Frequently Asked Questions (FAQs)
Is the Kimber Solo reliable?
Given that the fact there are so many many people on the internet complaining about it, it would be tough to say it is top of the line when it comes to reliability. Although, they could the vocal minority.
Is the Kimber Solo discontinued?
Yes, Kimber solo has been discontinued in 2017.
When was the Kimber Solo released?
Kimber solo was first released in 2011.
How big is the Kimber Solo?
Kimber solo comes with a 2.7-inch barrel and weighs only 17 ounces.
Is Kimber made in the USA?
Yes, Kimber pistols are made in the USA.
Does Kimber have a lifetime warranty?
Kimber weapons are promised to be free of material and workmanship defects for one year from the date of original retail purchase as a new product.
Kimber Solo has proven to be a hit-or-miss gun. If you are lucky, you are likely to get excellent service and flawless performance.
On the other hand, you might have to continuously fight different Kimber solo problems. It is assumed that due to many design flaws, Kimber discontinued its production.
So, unless you are a veteran who knows what he is doing it is better to avoid this gun.