Kimber Custom II Problems You Should Know

The Kimber custom ii is a fantastic choice for personal defense. With its affordable prices, you get a lot for your money, including a pistol that is reliable and accurate. However, it is not free from issues and you should be aware of them before making a purchase.

Some of the Kimber Custom II problems you will probably have to face are hard recoil, subpar quality assurance, stove piping, and failure to eject.

In this post, I’ll go into greater detail regarding these Kimber custom ii difficulties. I’ll even share with you a few solutions to these typical problems.

Features & Specifications of Kimber custom ii problems:

Height5.25 inches
Weight38 ounces when empty
Capacity7 rounds
Recoil Spring16.0lbs
Barrel length5 inches
SightFixed low profile, radius 6.8
Common KIMBER CUSTOM II Problems

Common Kimber Custom II Problems and Solutions

In this section, we will be looking at some of the common problems of Kimber’s custom ii problems and how to solve them.

Quick Overview of the Problems and Solutions

Hard recoilTry changing the ammo or recoil spring of both
No serration on handle frontInstall custom grip
Failure to ej
Change magazine
Bad Quality assuranceCheck thoroughly before purchase
StovepipingSweep it off, make some hard tap on the sides

1. Hard recoil:

The recoil on the custom ii might seem harder than its counterparts. It happens

due to the stiff recoil springs. But only springs do not contribute to hard recoil. The ammo type and quality also play a big part. The recommended rounds for this is PMC.

The Fix:

Try changing the ammo first as it is easier. Use PMC ammo as it has the best impact, and try to avoid Magtech.

If that does not help, then changing the recoil spring can result in a positive effect. Install a softer spring that can absorb more push.

2. No serration on handle front:

The front strap of the handle on this gun is very smooth, which can cause problems. When handling the recoil, the smooth section works against you.

Because it could slip from the hand during recoil. If you have a sweaty palm, not wearing gloves might make things tough as the gun could slip.

The Fix:

Although the issue may appear minor, you might consider adjusting your grip. The ideal approach would be to install a custom front strap. Or, always use you shooting glove when carrying it around.

3. Failure to eject:

After shooting, the bullet casing should be able to exit the chamber. When the case becomes stuck within, it is referred to as failed ejection. The issue might be with a firearm’s internal parts, magazine, ammo, or all of them.

The Fix:

Initially, try replacing the ammunition because bullets sometimes have flaws. Because low quality round often causes this problem.

If it doesn’t work, you’ll have to open up the handgun and smoothen the rough edges. If the situation persists, you should file a warranty claim.

4. Bad Quality Assurance:

When it comes to Kimber custom ii, there are many individuals on both sides of the debate. Some claim it works wonderfully, while others claim it is a piece of crap.

According to the internet, Kimber Custom II experienced some quality control concerns with this gun. So, some people got the guns with issues and some got the gun that went through proper QC.

The Fix:

If everything appears to be in order, proceed with the purchase. Also, if you spot any anomalies, send them immediately to Kimber for repair.

5. Stovepiping:

Stovepiping is an irritating problem that you might have to face with custom ii. When the bullet shell gets stuck in the slide somewhat perpendicularly, it is called stovepiping. But fix for this problem is quite easy.

The Fix:

The first thing you should do is to sweep the bullet off and that’s it. After sweeping the gun would behave as usual.

But you will have to practice keeping your eyes open so that you can act in minimal time.

Also, some hard taps on the side of the gun would help.

User Feedback on Kimber Custom II

Check out the Kimber Custom ii if you’re seeking a well-crafted 1911 produced in the United States. If you prefer the two-tone finish, or if you desire ambidextrous safety or other features, they will most likely have one for you.

When it comes to custom ii, the most problem appears due to faulty magazine as this YouTuber explains. If you face any problems, once you have changed to a proper magazine. Then the problem is most likely to get resolved.

This gun is very well crafted and accurate as you will in this video. A user aliased Chuck43 on sums up this gun very well.

He said, It’s a fantastic gun for the money and it is very accurate. He also stated that it is 100% dependable and can go from mild to wild just by changing the ammo in the magazines.

Another user said on the same thread that he has the gun for 3-4 years and shot around 3000 rounds without any problem. But he had to replace springs timely and do routine maintenacne.

Most of the users posted similar responses. Even though some had faced a few problems, in the beginning, those problems were easily sorted out.

Frequently Asked Questions (FAQs):

Is Kimber a high-end gun?

A pistol’s genuine quality is determined by its accuracy, durability, and useful features. And Kimber easily passes these quality checks.

Where is the Kimber Custom 2 made?

In Yonkers, New York, Kimber Manufacturing, Inc. creates, produces, and sells Kimber guns.

Is it a Kimber Custom II A 1911?

Yes, Kimber Custom II is a highly accurate M1911-style pistol.

Is the Kimber Custom 2 stainless?

Yes, the frame of Kimber custom 2 is made of stainless steel.

What size is a Kimber Custom 2?

Its height is 5.25 inches, and its length is 8.7 inches with a 5-inch barrel length.

How much does a Kimber Custom II weigh?

It weighs 38 ounces when the gun is empty.

Are timbers known for jamming?

Kimbers are known for jamming on a magazine’s first round. But this problem appealed less with regular use.


There is no such thing as a problem-free gun, and the Kimber custom II is no exception. The elements that set it apart from the competition are comfort, accuracy, and performance.

After the break-in phase, the pistol becomes buttery smooth. And the majority of the issues you’re going to encounter with this gun are simple to resolve.

Kimber Custom II problems can be solved with minimal effort. And once you’ve resolved these issues, you’ll see why it’s considered one of the elites.

Related Posts:

Related Posts