People buy the Browning Citori 725 for skeet and sporting clays. And once they start using it, they forget to use their Berettas. The trigger is an intriguing change from previous models, making the rifle an absolute joy to use.
Yet, the 725 is not free from problems. The most common problems with the Browning Citori 725 are: firing pin, trigger issue, ejector problem and bottom barrel.
I will give you the solution to these common issues in this article. Additionally, you will get authentic reviews from users as well. So, stay tuned!
Features & Specifications of Browning Citori 725:
| Action | Break Open |
| Gauge | 12 Gauge |
| Product weight | 113.6 ounces |
| Product length | 50 inches |
| Capacity | 2 rounds |
| Receiver Description | Steel |
| Barrel length | 32 inches |
| Barrel | Vent Rib |
Common Browning Citori 725 Problems and Solutions
| Problems | Solutions |
| Firing Pin | Clean and troubleshoot. |
| Trigger Issue | Clean, lubricate and troubleshoot. |
| Ejector Problem | Replace the spring/hammer spring. |
| Bottom Barrel | Troubleshoot firing pin, replace primers. |
1. Firing Pin
The lower firing pin can get damaged and cause light strikes. It is possible to pit the firing pin on the lower barrel.
The Fix
RIO, Herter’s, and reloads using cheddite primers are tougher primers that have a propensity to harm the firing pin. The pitting is most commonly caused by pierced primers, however, firing pins can also be chipped.
Keep an eye on your empty shells and look for black soot on the shot primers. If this occurs, you are piercing them.
Premium ammunition with soft brass primer caps is less likely to pierce than promotional ammunition with steel primer caps.
You can buy the JP pins and springs as an aftermarket replacement. He makes his bottom pin somewhat longer than the original version for individuals who have mild strikes in the bottom barrel, which is frequent with Citori’s pistols.
However, Win 209 primers may be more reliable and durable.
2. Trigger Issue
The triggers are not real mechanical triggers, and mild recoils might cause them to malfunction. The trigger begins to “freeze up.”
It will fire normally, but when you reload, the trigger may not move. And if you pull hard, the hammer will sometimes be released.
The Fix
Ensure that the shell is completely opened when withdrawing it. Hammer may not be cocked. This is simple to perform on a brand-new firearm that is still stiff.
Or it may require a thorough cleaning. There may still be some packing grease in the action. Remove your stock and wash it in hot soapy water after newly buying the gun.
Then, blow dry and lubricate again. Additionally, check to see if a fragment of ammunition is lodged behind the extractor. If there is, this may be causing the problem.
Carefully get the stuck piece out.
3. Ejector Problem
The ejector discards shells with too much force. It flies around 5-6 feet off the shoulder or head.
The Fix
Changing the springs does not affect the distance the empty shells are thrown. You may configure it to barely eject empty cartridges.
The 725 should be compatible with all 1911 firing pin springs. However, inspect the bottom barrel spring for coil binding in this case.
To transition from eject to extract, lighter springs appear to be another preferred method.
4. Bottom Barrel
About every 25 to 50 shots, the bottom barrel fails to fire. even when it is chosen to fire first.
The Fix
It is a frustrating issue that is also quite common. The firing pins are not propelled by a direct blow from the hammer, but rather by inertia.
The best solution is to tig-weld a little patch onto the rear of the firing pin. This causes the pin to move earlier in the arc of the hammer, allowing it to strike the primer with more force.
Clipping one or three coils from the firing pin rebound springs will lighten them, but this will not cure the problem. Try different hammer springs.
Additionally, use Winchester primers. Clean the firearm. Yet, if the firing pin does not function, get a replacement hammer spring and take it to an expert who can replace it.
User Feedback on Browning Citori 725
Users seem somewhat unbothered about this gun. Let’s start with a few opinions and my speculations about this.
The Pro Trap variant of the rifle is ideal for the vast majority of users. The swing is smooth, and the recoil is gentle.
It is an excellent firearm, and its fans would strongly suggest it. The differences between the 725 Trap and 725 HR Sporting shotguns are minimal. Besides the stock, that is.
The Trap shotgun has a 1 9/16-inch drop at the comb and a 1 15/16-inch drop at the heel. While the drop at the comb of the Sporting clay model is 1 9/16, the drop at the heel is 2 3/8.
Despite these nitty gritty details, the rifle mount is fantastic across the species! The marriage of check/stock and shoulder/stock is a dream. There is “something” about this rifle that makes it fit perfectly when mounted.
Nonetheless, the ejectors are a pain in the bum. Opening a brand-new O/U is difficult as well. The top lever is somewhat difficult to pull to the right, which unlocks the action.
Additionally, the process of “cracking it open” is somewhat difficult too. However, the balance of the Citori is impeccable.
Top 3 Alternative Guns of Browning Citori 725
Based on comparing the specs, features, practicality, and performance, I have found the 3 best alternatives to Browning Citori 725 .380 semi-automatic revolver.
Beretta 686 Onyx Pro
You will be able to install an additional barrel set. At least recently, Beretta has had finer wood and finish. Overall it’s a better gun.
Citori CX
It works well for all clay-target sports. It weighs nearly half a pound more than the 725, and the additional weight will assist to dampen the recoil during extended shooting sessions.
Browning White Lightning
Compared to some of the more costly shotguns, the White Lightning fires better. It also might fit you better than the 725!
Frequently Asked Questions (FAQs)
Is the Browning Citori 725 the better choice for more trap shooting?
The Citori 725 High Rib Sporting Adjustable may be the better choice for more trap use.
When was the Browning Citori 725 made?
It was introduced in 1972.
Does the Browning 725 have auto safety?
It comes with a mechanical selective trigger with a manual safety.
What is the front side blade material of the Browning Citori 725?
A fiber optic front sight blade.
What is the recommended lube for the Browning Citori 725?
Mobil 1 and Valvoline both make a good synthetic WBG.
Conclusion
The Browning Citori 725 is the ideal over-and-under shotgun for 60% sports clay use and 40% trap use. The majority of consumers report that it was perfect during their usage.
The Citori has a fantastic fit. Although it is a “production pistol,” the amount of hand-fitting makes it a true work of art.
When cleaned, the finish on the barrels is flawless and gleams. This shotgun is fantastic. Therefore, if you are confused, I would say give it a try!
