The Browning Automatic 5, or A5, is a semi-automatic shotgun with a recoil mechanism. The Browning A5 is an inertia-operated shotgun that is more akin to a Benelli than any other Browning ever made. However, there are a few Browning A5 problems to be aware of before making hurried decisions.
The most common complaints about the Browning Auto 5 are failure to eject, jamming, and feeding problems.
This article will describe the most likely reasons for these issues as well as possible solutions. So, let’s get this party started.
Features & Specifications of browning auto 5 Gun:
- Action: Inertia semi-auto.
- Capacity: 4+1
- Chokes: 5 extended Invector DS.
- Barrel: Fiber optic front bead.
- Barrel Lengths:26 and 28 inches.
- Finish: Camo and Cerakote.
- Length: 49.625 inches.
- Length of Pull: 14.25 inches.
- Trigger Pull: 6.9 pounds.
- Overall Weight: 6.8 pounds.
Common Browning Auto 5 Problems and Solutions
| Problems | Solutions |
| Cycling Issue | Apply a drop of oil to it and make sure it moves easily. |
| Extractor Issue | This problem can be resolved by polishing or replacing the extractor claw. |
| Ejection Issue | Using a good recoil spring might solve the problem. |
| Jamming Problem | After cleaning the pistol, properly lubricating it may resolve the problem. |
| Feeding Issue | Use appropriate ammunition and shoot some bullets to ensure the pistol is smoother. |
Magazine Issue
Your magazine could be the source of your riding problems. Magazine problems include bent feed lips, worn-out springs, damaged mag catch apertures, misaligned followers, and others.
Another factor is the use of fresh or different ammunition.
The Fix
The solution is simple: remove the excess carbon buildup with a carbon scraper and other pistol cleaning tools to get your gun functioning again.
Extractor Issue
After firing a round, the bolt returns, but the empty shell is not discharged. It is still stuck halfway out of the chamber.
Your difficulty could be caused by issues with shell rim measurements. Especially if the Winchesters are the only hulls that cycle consistently.
The Fix
Because 90% of such problems are cleaning-related. Clean the rifle thoroughly. Replace the extractor if cleaning does not work. The new extractor may be longer and have a different cut angle.
Ejection Issue
The major problem is a faulty magazine spring. It occurs when the casing of a recently fired bullet fails to exit the gun’s chamber.
The recoil spring is another common cause. If you use a recoil spring that is too tight for the ammo, the slide will cycle faster than the spent case goes out the ejection port.
The Fix
You could have a faulty ejector. Attempting to replace the ejector may resolve this problem.
To begin, check sure you’re using the correct recoil spring weight for your ammunition. Lighter loads necessitate lighter springs, while heavier loads necessitate stiffer springs.
Jamming Problem
With filthy chamber and inefficient functioning, a broken spring can occasionally create a jam. Shells can become caught between the shell lifter and the bolt on some shotguns.
Between the breech bolt and the shell lifter, the shell is put into the magazine tube. Cheap ammo jams the trigger mechanism, preventing the safety from engaging.
The Fix
Either you have gunk in the lifter or weak spring. What you must do must be done in a certain order.
You might be able to remove the barrel and spray gun scrubber from the action while holding it action down outside on the driveway.
The shell itself is the root of many semi-cycling problems Certain weapons are just more likely to jam than others due to tighter chambers/internal geometry.
Feeding Issue
Feed problems are almost often caused by magazines, gas pressure, and defective recoil springs. If it returns too soon with too high tension, or if it lingers too long with inadequate tension during the recoil cycle.
The same may be said for gas pressure. Failure to feed is caused by either too much or too little gas pressure.
The Fix
The first thing to look at is the gas pressure. If not, updating it should solve the problem.
If this is not the case, the magazine or recoil spring is most likely to cause. Replace them to see whether the problem is fixed. If it doesn’t, send it in for repair.
User Feedback on browning auto 5
Browning provides a synthetic A5 Stalker and a pair of A5 Camo variants in two Mossy Oak patterns. All three are available with barrel lengths of 26, 28, or 30 inches and chamber lengths of 3.5 inches.
This is a recoil-operated autoloader that employs Browning’s Kinematic Drive System, which shares many similarities with the now-expired Benelli patent.
A Browning Auto 5 owner stated on rugerforums that concerns with shell rim dimensions can cause extractor troubles. Especially if the Winchesters are the only hulls that cycle consistently.
It appears that it is time to merely shoot Winchesters in that gun! I’ve heard of other guns having similar problems, although usually with European-made hulls.
The Browning Auto-5 shotgun is readily identifiable due to its humpback receiver shape. After more than 90 years of manufacture, the sales figures speak for themselves: more than 2.7 million made and sold.
Top 3 Alternative Guns of browning auto 5
Maxus II
The Power Drive Gas System cycles all shotshells quickly and reliably while also reducing felt recoil. The Lightning Trigger boasts a lightning-quick lock time for quick follow-up shots, and the ergonomic form fits well in your hands.
Beretta a400
The Beretta A400 shot 60% above and 40% below point-of-impact. It’s a gun that shoots in the direction you point it. Its finest design included 109 of 140 pellets (78 percent) within a 30-inch circle.
Remington 1100
It also weighed substantially less and was far more reliable than its predecessors. The Remington 1100 is credited with ushering in the era of autoloading gas-operated semi-automatic shotguns.
Frequently Asked Questions (FAQs)
Is the Browning Auto-5 a good gun?
They point well, perform consistently, look nice, and last a long time. For good reason, the Browning A-5 is still a highly popular gun today.
Is the Browning Auto-5 still made?
It was manufactured continuously for nearly 100 years by multiple manufacturers, with production stopping in 1998.
Was the Browning Auto-5 used in war?
It was widely utilized throughout World War I and was still in use during World War II.
Is the Browning A5 inertia or gas?
It has a similar appearance to the Auto-5, but it has an inertia-driven working system, similar to the Benelli guns.
What is a magazine cutoff on a Browning A5?
Allowing the shooter to keep rounds in the magazine and eject a shell from the chamber without cycling a shell.
Can you put a scope on a Browning A5?
Yes. It is compatible with the Browning Auto-5.
Conclusion
Browning A5 problems, causes, and solutions have all been adequately covered.
The A5 is a duck gun, yet it’s light, slim, and shootable enough to double as a hunting gun. However, the solutions provided may be insufficient for your requirements.
In such cases, consulting with a gunsmith or shipping the weapon to Browning is the best option.
