The hammer-fired, polymer-framed P30 series now has a subcompact version in the form of the new HK P30SK. The third variant of the P30 was released in 2007 with a compact frame and 3.85-inch barrel.
The problems that have been faced by shooters during the use of this gun are slide release issues, feeding issues, trigger issues etc.
Some of the drawbacks of this gun have been covered in this article, along with solutions for those drawbacks. To learn everything there is to know about the issues with and fixes for the H&K p30sk, read the entire article.
Features and Specification of H&K p30sk:
- Caliber: 9mm×19
- Length: 6.42 inches
- Height: 4.57 inches
- Width: 1.37 inches
- Barrel length: 3.27 inches
- Weight: 23.99 oz
- Magazine capacity: 10/13/15
- Sight Radius: 5.84 inches
- Action: Striker
- Trigger System: SA/DA/LEM
- Sights: Fixed Sights
Common H&K p30sk Problems and Solutions
| Problems | Solutions |
| Slide release problem | Replace the spring |
| Slide not locking back | Avoid putting your thumb on the slide stop and try using one hand |
| Flat trigger issue | With a qtip, apply some citrustrip to the paint. |
| Feeding issue | Carefully fill the magazine feed lips and polish it or change the magazine |
1. Slide Release Problems:
Often shooters face the slide release issue. When they try to shoot, the slide doesn’t come off smoothly. This issue occurs when there is a problem with the frame. The frame might have been damaged that initiated the issue.
The Fix:
When attempting to remove the slide, totally detach the Slide Release Lever from the frame. Before entirely removing the lever from the frame, raise the leg.
And, due to the excessive that has been initiated, the spring is completely bent. Simply change the spring and it should fix the issue.
2. Slide Not Locking Back:
The slide frequently stopped locking back when it was the last round. And, if a magazine was loaded or not, it then commenced discharging.
Even when held on the bottom of the grip, it continues to lock back, and even after using a new slide lock, the problem may worsen. One might not obtain a lock back if one handloads with slightly lower pressure.
The Fix:
Inspect your grip to make sure your thumb is not resting on the sliding stop. This is a typical problem, particularly with firearms like the P30 where the slide stop is located further to the back.
Avert taking shots with your two thumbs forward. Using a different might help as well.
3. Flat Trigger Issue:
To preserve uniformity across platforms, Shooters fit P30SK with a Gray Guns flat trigger more often. However, this generates an issue, The SK felt soft with no wall once the flat trigger was placed.
Just barely, the curvature at the top of the flat trigger is pressing against the back of the trigger guard and grip. The issue may arise because of the paint as well.
The Fix:
Call Gray Guns and see what happens if you try to hit the interior of the trigger guard with some 1000 grit or finer sandpaper. Additionally, simply use a qtip to apply some citrustrip to the paint while keeping an eye on it.
Never try to do painting on the trigger guard. And, if you do so then don’t overdo it. Because the issue will come back.
4. Feeding Issue:
The first couple hundred rounds with this gun went through it without a hitch, but after that, the slide slingshot when a new magazine was inserted, and it was failing to feed.
If the slide was placed back in its closed position before inserting a fresh magazine and the slide was then racked to load the first round, it would feed without any issues, but every time shooters slingshot the slide, it would malfunction.
The Fix:
Just slightly fill the magazine feed lips, then polish them. Even after more than a thousand rounds, it continues to perform flawlessly.
It could also be a problem with a magazine. What a good magazine cleaning can accomplish is remarkable. Use a toothbrush and rag to deal with the problem. Changing the magazine is a better solution.
Some people might have accidentally ridden the slide down a little bit while slingshotting. On a loaded mag, try using the sliding release. Most likely, it would feed.
User Feedback on H&K p30sk
It boasts a decent set of factory sights, and its practical accuracy at 7, 15, and 25 yards was satisfactory. There are no difficulties with dependability. The 9mm round isn’t the hardest-kicking round, but it still makes for fun shooting.
The grip texture of the p30sk is somewhat rough, in contrast to the smooth, refined texture of the p30. It has slightly better single-action and double-action figures than the P30s. However, given the price point, the trigger is minimal.
Its size is appropriate for a carry gun, and its steel slide is of excellent quality. The shooters will benefit from the texture. Although the single action trigger is one of the smoothest ever, the double action trigger pull is long and heavy.
For a sub-compact gun, it is enormous. It is not portable. It has an ambidextrous slide and mag releases. Paddle-style mag releases are unfeasible. The ergonomics are excellent. However, the upper portion of the frame could have utilized a little more grip texture.
Top 3 Alternative Guns of Smith and Wesson Governor
H&K p30
P30sk is a sub-compact model of p30. These two guns share somewhat similar features in terms of cartridges, actions, sights and materials.
Systematic safety is what the P30 pistol stands for. Instead of being mere platitudes, the P30’s development and design team steadfastly pushed a dedication to user-oriented performance.
The end result is a premium line of pistols that perfectly balance maximum safety and functionality.
Glock 26
The Glock 26 offers the most recent generation of GLOCK’s excellence. The popular GLOCK 26 Gen5 now comes with the GLOCK Marksman Barrel (GMB), which improves accuracy with polygonal rifling and a revised barrel cap.
Other notable features include the elimination of the finger grooves, an ambidextrous slide, and an improved GLOCK hard-surface polish.
H&K vp9:
H&K vp9 and p30sk guns have a lot in common. But, both self-defense and competitive shooting are great uses for the H&K VP9. The trigger is good, and sharper sights and a wider field of view increase accuracy.
Such a variety of grips. The gun can be made to suit the shooter’s hand almost exactly. It has a push-button magazine release as opposed to a paddle style, obviously to make it a good alternative to p30sk.
Frequently Asked Questions (FAQs)
Is the P30SK +P rated??
Despite the fact that it does not recommend +P and +P+ either, the USP handbook does “approve” their use, but the P30 does not.
Does HK P30SK have a safety?
The P30SK has an automated firing pin and hammer safety, just as all P30 pistols.
How many rounds does a HK P30SK hold?
A flush-fit 15-round magazine is included with each HK P30. However, as of 2020, it will also accept 17-round magazines.
Is HK P30SK good for concealed carry?
The HK P30sk is a big gun. You won’t be wearing it around your ankle or carrying it in your pocket as a result.
Conclusion
The newest member of the well-respected P30 pistol family is the P30SK. With another first-rate defense weapon in an incredibly small design, the P30SK brings the P30 full size series to a close.
Along with its well-known dependability, the P30SK is distinguished in particular by its ergonomically superior pistol grip. The pistol offers a maximum configuration to any hand size, for both men and women.
The MIL-STD-1913 standardized Picatinny rail located at the front of the pistol grip offers more mounting options for tactical attachments. These unique things have made this gun an incredible weapon to jump in.
