The Springfield Saint Victor is an excellent AR-15 that is simple to use and fire. The construction is solid, and despite its low weight, the firearm is loaded with features. However, it is not entirely devoid of difficulties.
Failure to feed, failure to eject, stovepiping, bolt carrier group malfunction, and jamming rank among the most often encountered issues.
Features & Specifications of Springfield saint victor:
- Action: Direct-gas-impingement, semi-automatic center-fire rifle
- Caliber: 5.56 NATO (.223 Rem)
- Grip: Synthetic
- Trigger: Nickel-boron coated, flat face
- Product weight : 6 pounds 9 ounces (unloaded)
- Product length: 32.25 inches to 35.5 inches
- Capacity: 30-round capacity Magpul PMAG
- Barrel length: 16inches
Common Springfield Saint Victor Problems and Solutions
| Problems | Solutions |
| Failure To Feed | Clean the magazine, sharpen any sharp edges odd the lip. |
| Failure To Eject | Clean the chamber and ejection port. |
| Stovepiping | Use proper ammunition. Make sure not to rack the slide. |
| Bolt Carrier Group Malfunctioning | Send back to the company; upgrade the BCG. |
| Jamming | Lubricate the receiver and bolt with Rem Oil. Remove the stuck bolt. |
1.Failure to Feed
Approximately once every 80 rounds, Saint Victor fails to feed. This could be due to a number of factors, including a dusty chamber, a dry BCG, or a doubtful batch of PMC Bronze.
The most common source of this common problem is a dirty magazine.
The Fix:
You should clean your magazines often, and you should clean them more frequently if you’re shooting in dusty or sandy situations.
In addition, the magazine’s lip should be inspected for damage, as this might lead to feeding problems. A file or emery cloth can be used to easily remove any rough spots off the lip in this scenario.
2. Failure to Eject
The Saint Victor frequently experiences a failure to eject issue. The gun jams and fails to eject the spent shell casing; when the chamber was cleared with a cleaning rod, it jammed again and failed to eject.
The most common reason is a dirty chamber. Ejection port obstruction is another possible source of this issue
The Fix:
Keep your chamber clean on a regular basis. Anything from dust and grime to a spent casing that didn’t fully eject can fall into this category. If you see something that could be an obstacle, remove it before you continue firing.
3. Stovepiping
A “stovepipe” malfunction occurs when a spent casing is not expelled far enough or quickly enough from the firearm’s ejection port; Saint Victor firearms exhibit this fault. it doesn’t run reliably.
Approximately every 2nd to 5th round, you may encounter a stovepipe or a round that does not eject. With certain ammunition, it functions properly, but with specific ammunition, the issue becomes severe.
The Fix:
With Winchester .223 ammunition, it functions flawlessly. Even Winchester 5.56 operates nearly faultlessly. Try employing this ammunition.
When the stovepipe fails, don’t rack the slide. This can produce a double feed malfunction that’s difficult to remove and leaves live ammunition on the ground.
4. Bolt Carrier Group Malfunctioning
If your victor does not have this bolt carrier group and it is malfunctioning, the BCG is likely at fault.
The Fix:
Send it back to the company and ask for the upgraded BCG you were promised. From what I can tell, the rounder BCG is the one you receive when you purchase a non-victor saint.
5. Jamming
There are issues with Saint Victor, such as jamming. The bolt may not be able to be retracted because it becomes jammed partially in the forward position. It won’t always fire, and when it does, it jams every other time.
The Fix:
If it’s loaded, you should take it to a gunsmith while pointing the muzzle away from anyone.
If the gun is unloaded, you can lubricate the receiver and bolt with Rem Oil. Give it a few minutes to sink in. A quarter-inch wooden dowel should be inserted from the muzzle all the way to the bolt face. Pick up a hammer and tap the dowel’s opposite end. The bolt must be unfastened now.
Replacement of the whole BCG resolves this issue for many users.
User Feedback on Springfield Saint Victor
At such a low cost, the Saint Victor line provides first-rate quality. Many gun owners and enthusiasts all over the world hold conflicting views on the firearm.
One user commented that he had purchased one. He said it is simple to shoot accurately and is comfortable. He’s a big fan of the Red Lancers’ magazines.
According to another user, the Springfield Armory Saint Victor is the most accurate AR-15. It is very pointable and features a slender hand guard.
However, this pistol is not without flaws. Many consumers have experienced issues with Saint Victor. difficulties including jamming, inability to eject or feed, stovepiping etc.
An individual purchaser revealed that he had recently acquired his first AR and he Went with the saint Victor. Unfortunately, it constantly stovepipes and doesn’t operate smoothly, otherwise he loved it.
Top 3 Alternative Guns of Springfield Saint Victor
Smith & Wesson M&P15 556 AR Pistol
The Smith & Wesson M&P15 is a semi-automatic rifle of the AR-15 design, and it boasts excellent ergonomics, a traditional creep & crisp trigger, and a clean break. Greatly substituting the Saint Victor
Springfield Saint Edge
Victor and Edge have spring-loaded, flip-up iron sights. Both feature flat receivers. Edge is useful for competition shooting, etc. Victor hunts in the woods. They have various barrel sizes.
Ruger MPR
Both are quality firearms made by dependable manufacturers. When comparing only the 16-inch models, the Springfield has BUIS and a slightly longer rail, but it is pretty expensive. The trigger on the Ruger is superior.
Frequently Asked Questions (FAQs)
Is the Springfield Armory Saint Victor a reliable firearm?
The Springfield Saint Victor is a precise, dependable, and user-friendly AR-15.
Is the Springfield Saint Victor out of production?
Yes.
Is the Springfield Saint Victor barrel chrome lined?
The Springfield Saint Victors’ barrel is a 16-inch chrome moly vanadium barrel with a corrosion-resistant Melonite finish.
Where is the Springfield Saint Victor made?
Geneseo, Illinois.
What is the trigger pull on a Saint Victor?
6 pounds plus a little creep.
What ammo does Saint Victor use?
.56 NATO and .223 ammo.
Conclusion
I have provided the clearest possible descriptions of problems, their causes, and solutions in Springfield-Saint Victor.
But it’s possible that the recommended solutions won’t solve the problems you’re encountering.
The best course of action is to visit a gunsmith or ship the revolver to Springfield Armory in such a situation.
