The M&P 15-22 by Smith & Wesson is a 22-caliber military rifle. It is a semi-automatic gun with an AR-15 appearance. The Smith and Wesson M&P 15-22 is regarded as the market’s best AR-15 knockoff.
This pistol may have some drawbacks despite its many admirable qualities.
Loose ejector, frequent misfires, failure to feed, issues with tilting bullets, loose buttstock, and uncomfortable grip are some common Smith and Wesson M&P 15-22 problems.
I’ll discuss the most common Smith & Wesson M&P 15-22 problems in this article. Let’s now examine some of this revolver’s specs and features.
Features & Specifications of Smith and Wesson M&P 15-22 Gun:
|Smith and Wesson M&P 15-22 Specs|
|Barrel Length||16.5 Inches|
|Weight||76.8 Ounces or 2,177.20 Grams|
|Action Type||Semi-Auto Blow Back|
|Safety||Manual Safety on Lower|
|Sights||Folding Magpul (MBUS)|
Common Smith and Wesson M&P 15-22 Problems and Solutions
|Problems with Smith and Wesson M&P 15-22||Solutions|
|Loose Ejector||Clean the chamber thoroughly and try out various ammo.|
|Frequently Misfires||Change the ammo or inspect the firing pin, or clean the weapon.|
|Feed Failure||Clean the interior of the rifle and place the magazine correctly.|
|Trouble with Bullet’s Head Tilt||Follow the manual properly.|
|Loose Buttstock||Take out the old buttstock and replace it.|
|Uncomfortable Grip||Swap over its manufactured grip for a new one.|
1. Loose Ejector:
You might run into a loose ejector when cleaning or after a few shots have been fired.
Though it does rarely happen earlier, this problem usually shows up after a huge number of rounds.
If this problem is not resolved as quickly as possible, you can experience a loose ejector every couple of rounds, which is extremely dangerous in an emergency circumstance.
A little quantity of buildup can be stored in the chamber, so thoroughly clean it with the appropriate solvent and brush.
Try out several cartridge types for your rifle to determine the one that works best and prevents ejector loss when shooting.
The space between the bolt and the ejector is rather wide; to fix it, you must narrow the gap. You can get guidance from this video.
2. Frequent Misfire:
After shooting hundreds of rounds, the weapon mainly began to misfire, according to several consumers.
This problem may be brought on by incorrect ammunition or infrequent cleaning. Mostly defective firing pins are the main cause of this problem. While shooting, the firing pin might fall unexpectedly, resulting in a misfire.
If the firing pin is to blame, take it out of the rifle and give it a thorough cleaning. Replace the firing pin if it is broken before trying to fire again.
Try to look at various ammunition options and determine which is best for your rifle. In certain cases, changing ammunition resolves this issue.
Don’t forget to thoroughly clean your rifle.
3. Feed Failures:
Customers have claimed that the rifle frequently experiences feeding problems.
Sometimes a problem might be caused by using the wrong ammunition or placing the magazines in the wrong positions.
Once the rifle has been used for a while, inadequate cleaning before firing may cause a feeding problem. In dire circumstances, this problem may do great harm.
If your rifle is very old, clean it before using it. Because dirty gun components won’t solve the feeding issue.
Do not forget to dry and clean the interior of the top side of the rifle, including the breach area. furthermore, a drop or two of lubrication is all that should be used.
Make sure to position the magazine properly. You might try arranging the ammunition in a zigzag pattern.
4. Trouble with Bullet’s Head Tilt:
Many users have encountered ammo problems while shooting. After firing some rounds for a while, the bullets begin to infrequently lean downward.
This problem results in the weapon’s poor accuracy, failing to extract, etc. Not following the instructions for loading the magazines might be the cause of this problem.
To load the rounds correctly, follow the instructions. You may change the bullets and try a different one.
Send it back to the company if it doesn’t function.
5. Loose Buttstock:
The problem with the gun’s buttstock is that it was manufactured loosely. It is quite challenging for beginners to handle.
In severe circumstances, a loose buttstock can occasionally lead to serious problems. This characteristic of the Smith and Wesson M&P 15-22 rifle has some customers very unsatisfied.
Pull the stock position lock to release the but stock first, and it will slide off without difficulty. Get assistance from a gunsmith if it is difficult to remove or jams up in the process.
Then replace it with another buttstock; you may choose to try Trinity Force’s Omega Stock for the rifle because it isn’t flimsy. It will cost you about thirty dollars which is cheap.
You should see this video as it will provide you with the right instructions.
6. Uncomfortable Grip:
A significant portion of customers finds the grip of this rifle unpleasant. It is uncomfortable since there are no finger grooves on it.
Additionally, it will be awkward for you to grip the rifle if you have large hands. as the diameter of this gun is not particularly large.
The company won’t reverse this grip without charging you. So much the better, you can alter it with the assistance of a professional or your local gunsmith.
A Magpul MIAD grip may be used to replace their previous grip. You will also need a Magpul kit or any other kit to replace it if you are doing it yourself.
User Feedback on Smith and Wesson M&P 15-22
The Smith & Wesson M&P 15-22 is the smoothest to use and shoot. You may always send it back if it doesn’t function because Smith & Wesson is a very customer-friendly company.
There are many varied opinions on the rifle voiced on the Snipers Hide forum. Customers frequently choose the Smith and Wesson M&P 15-22 model, and some people suggest personalizing it to suit their tastes.
A thorough introduction is provided in this post of The High Road. Before buying this revolver, you should know all the features.
Top 3 Alternative Guns of Smith and Wesson M&P 15-22
Here are some best alternatives for the Smith and Wesson M&P 15-22:
Ruger 10/22 Carbine Autoloading Rifle Model 1103
– Has a cross-bolt and push-button manual safety.-Noticeable magazine release makes it simple and easy to remove a flush-mounted magazine.
Tippmann M4-22 Pro
– Has an Aluminum M-LOK handguard.
– Very accurate with a 16 Inch barrel.
– Semi-automatic rifle with a capacity of 25 rounds.
Walther Colt M4 OPS 22LR Carbine Rifle
– Flexible dust cover with threaded muzzle function tactical railing.
– Possesses an A2 adjustable sight.
– 5-position sliding is used for the buttstock.
Frequently Asked Questions (FAQs)
What color and frame finish does the Smith & Wesson M&P 15-22 have?
The riffle’s color and frame finish are both matte-black.
What is the Smith & Wesson M&P 15-22 rifle’s barrel twist?
1 in 15 Inches.
What ammunition is suitable for use with the Smith & Wesson M&P 15-22?
Federal American eagle, CCI, Remington GB ammo.
What kind of stock does the Smith & Wesson M&P 15-22 rifle have?
6-position CAR stock
Does the Smith & Wesson M&P 15-22 have a threaded barrel?
How much does a Smith & Wesson M&P 15-22 cost you at least?
Currently, a Smith & Wesson M&P 15-22 is valued at $372.64 used and $466.90 new.
Can you put improved AR-15 triggers on a Smith & Wesson M&P 15-22 rifle?
Both beginner and experienced shooters will love the Smith & Wesson M&P 15-22 rifle. It will still be a great option considering all of its flaws.
This article lists the most frequent problems with this firearm. You can fix your Smith and Wesson M&P 15-22 problems if you properly follow my suggestions.