The Glock 22 Gen 4 is a fantastic rifle with little recoil and excellent accuracy. You’ll totally “Get Some” 16 times. Soft shooting is used. 40 that you could shoot accurately from a distance.
However, the most common problems with the Glock 22 Gen 4 are: failure to feed, ejecting issue, slide/trigger reset issues and slide stop pin problems.
I will give you the solution to these common issues in this article. Additionally, you will get authentic reviews from users as well. So stay tuned!
Features & Specifications of Glock 22 Gen 4:
|Barrel Length||114 mm|
|Magazine Capacity||Standard: 15 Optional: 16 / 22|
|Overall Length||202 mm|
|Sights||Factory Sights (polymer, steel, night)|
|Dimensions||Width (Overall): 32 mm Height Incl. Mag.: 139 mm|
|Weight||With empty magazine 725 g|
|Trigger Pull||28 N|
Common Glock 22 Gen 4 Problems and Solutions
|Failure to Feed||Replace ammo, troubleshoot mag well.|
|Ejecting Issue||Replace the extractor, and clean the gun.|
|Slide/Trigger Reset Issues||Fix RSA assembly and troubleshoot.|
|Slide Stop Pin Problems||Lube the gun. Properly position theslide stop pins.|
Failure to Feed
The rounds get jammed in the gun. They appear to function normally with cooler ammunition.
The remaining half of the rounds either nose-dive into the magazines or get caught under the ramp of the barrel.
Hotter loads, such as Underwoods 180gr TMJ, and a wider range of ammunition all contribute to the escalation of the problem.
The Stovepiping and round stopping at the ramp may be there. Many of these can be due to spring issues.
The mag wall(s) may occasionally bend inward and toward the center.
Definitely switch to Whitebox mags or something of similar quality. Replace the RSA.
If the mag-well is bent, fix it with the mag-tuning tool by Brownells. If magazine spring is problematic, change it.
The cartridge fails to eject and the next round jams behind it. Not extracting entirely, ejecting, smoke stacking, etc are one of the others.
The extractor may be chipped on the corner. Also, the
When you remove the floor plate, your spring should have at least two full coils visible.
If things get too awful, you should think about getting a new magazine. An excellent aftermarket magazine may solve your problem!
Examine the polymer spring loaded bearing, extractor depressor spring, firing pin safety, and extractor carefully. Carefully clean the pin and replace any distorted parts.
If you have replaced the RSA or installed a tac light, a little jamming initially is common.
Slide/Trigger Reset Issues
It slides to the back of the gun and stops. The slide fails to engage the trigger assembly. On the frame, the slide lays flat.
The recoil spring may get displaced out of the assembly. Additionally, you may have stripped your Glock out of lube.
The very first thing to do is to lube the hell out of your gun (just kidding! Lube properly).
To reassemble, pull back the trigger while pushing the recoil spring into the locking lug notch. With gen4’s, it’s a typical problem.
Alternatively, you can simply slide the slide-front back onto the frame while holding it down and pushing the safety plunger in to allow the striker to move more forward.
Slide Stop Pin Problems
The slide stop snags the slide nearly immediately after each round. Which you must release before firing again.
Either you’re hitting the slide lock lever, or the spring is constantly pushing it up rather than down because it was placed wrongly.
One of the pins may not be under the slide stop spring. It may instead be on top of the pin.
The force of the spring will be drawing the slide stop up and toward the slide if the slide stop spring is positioned on top of the pin.
For the spring to naturally press down on the sliding lock lever, you need to place it under the pin.
You can do this by disassembling the gun. Or you can take it to an expert gunsmith.
User Feedback on Glock 22 Gen 4
I’ll be honest with you, the users love this gun from what I’ve researched! It shoots well, is easy to clean and lube, and is easy to maintain!
The extremely common concern regarding the size of the grip for shooters with little hands was one of the main reasons for the introduction of the Gen 4 model Glocks.
In that regard, most female shooters who have fired this rifle prefer it without the backstraps. So that is saying something!
The Glock 22 gen 4 pistols truly shine with the 40S&W bullet. That renowned “snappy” round is particularly controllable thanks to the low bore axis and grip angle.
Additionally, if you fire fairly quickly, you could easily keep all of your rounds inside a 4″ target at 10 meters (just an example). That is quite accurate.
In my opinion, users have very few things to say about the Glock 22 Gen 4 that are bad!
Top 3 Alternative Guns of Glock 22 Gen 4
Based on comparing the specs, features, practicality, and performance, I have found the 3 best alternatives to Glock 22 Gen 4.
Glock 23 Gen 4
The G23 more than makes up for its reduced barrel length and capacity with its increased concealability and practicality. The G23’s size is as ideal as it gets for a self-defense handgun. It has the 13+1 capacity of a highly potent caliber.
A P229 can be carried both on and off duty because it is concealable. Despite being a touch heavy. It is among the pistols with the best accuracy.
It has an improved slide appearance and finish over the Glock. However, both are excellent and trustworthy firearms.
Frequently Asked Questions (FAQs)
How much does Glock 22 Gen 4 cost?
About $470; check the latest price here.
Between SIG 229 and Glock 22 Gen 4 which shoots better in a stressful situation?
SIG 229. Its natural point of aim is usually better with users.
What does it mean by Glock 22 Gen 4 expired night sights?
If the night sights are expired, it means they don’t glow anymore.
What type of recoil spring is there on a Glock 22 Gen 4?
Dual recoil springs.
How is the Glock 22 Gen 4 trigger better?
The Gen 4 offers lefties and those that prefer different grips an option. The proclaimed better trigger spring notch assists those unable to change a trigger spring with more ease hopefully breaking fewer springs.
The Gen 4 is a real gem of a pistol. You can keep it in 40 S&W but also have an S3F Match Grade 9mm conversion barrel for it that works out quite well. People also use a SIG barrel though.
It has the capacity of becoming your bedside pistol. You will also prefer the finger grooves on the full-sized guns. I believe you’ll love the structure of the Gen 4 over the Gen 5 Glock 22s.
So, I recommend you get this pistol if you are considering it.