Exploring the Most Common Tisas 1911 Problems (With Solutions)

High-quality parts are used in the construction of the Tisas 1911 to ensure dependability and constant performance.

Their set ups can accommodate every shooter, but the gun has some common issues you should know about.

The hard to rack, failure to feed, frequent hammer bite, blocked firing pin and accuracy issues are the most common Tisas 1911 problems.

Features & Specifications of Tisas 1911 Gun:

Calibre45 ACP
Barrel Length5.02 Inches
Weight39 Ounces
Length8.56 Inches
Action TypeSAO
ExtrasSpare magazine, spare plastic grips, cleaning rod and brush
SightsFront – Blade Rear – Square Notch
Common Tisas 1911 Problems

Common Tisas 1911 Problems and Solutions

Problems with Tisas 1911Solutions
Hard to RackInspect the spring coil and lubricate the slide rails.
Failure to FeedPractice regularly and focus on your grip.
Hammer BiteModify the hammer with experts help.
Blocked Firing PinClean the gun thoroughly and use oil.
Accuracy IssuesImprove the sights.

1. Hard to Rack:

The most frequent complaint from Tisas 1911 owners is that the slide is difficult to rack.  Retracting the slide all the way to its backward position demands greater force or effort.

The loss of the pistol’s spring tension is one potential cause. The slide may seem heavy to use if the springs grow worn or lose tension over time.

Additionally, increased friction might make racking more challenging if the slide is improperly greased or if the oil has dried up.

The Fix:

The first step is to inspect the spring coil. If you discover the recoil damaged, consider changing the recoil spring with a new one of the proper weight.

On a daily basis, make sure the slide and all of its parts are greased properly. The barrel hood, slide rails, and other moving components should be lubricated with suitable firearm oil.

Lubrication makes racking easier and helps to decrease friction. Double check that, the slide and frame are free of any impediments or foreign items that could prevent the slide from moving.

2. Failure to Feed:

Some customers may experience trouble with feeding, which is typically caused by a broken or worn-out magazine spring.

According to certain users, the Tisas 1911 may be sensitive to specific ammo types. Feeding issues might result from ammunition that has varying overall lengths or bullet shapes.

Also this problem can be brought on by inadequately supporting the gun or limp-wristing (an inadequately strong grasp and control of the firearm).

The Fix:

Disassemble the magazine first, then clean it well, and getting rid of any dirt or debris. If there are any indications of damage, such as bent feed lips or a worn-out spring, replace the magazine.

Make sure the cartridges are packed neatly, without being slanted or out of alignment, and load the magazine correctly. Ensure that you have a solid, reliable grip on the gun and that your hands are in the right places.

To create an effective shooting platform, regularly rehearse proper shooting techniques.

3. Frequent Hammer Bite:

The Tisas 1911 is built with a high grip in mind, where the hand is placed as near to the bore axis as feasible.

The webbing between your thumb and index finger may come into contact with the hammer during recoil if your hand is placed too high on the grip, leading to hammer bite.

The likelihood of hammer bite can be affected by the size and form of the hand. Improper shooting technique can also cause hammer bite.

The Fix:

Experiment around with changing your grip by dropping your hand a little bit on the grip. Make sure your thumb is positioned appropriately and isn’t perched too high on the rear of the grip.

If hammer bite still occurs after alterations to grip and technique, you could think about speaking with a skilled gunsmith to investigate changing the hammer’s design. The hammer could be reshaped or replaced with an aftermarket hammer by a gunsmith.

4. Firing Pin Becomes Stuck:

The movement of the firing pin assembly may be impeded or become stuck. This happens if debris buildup occurs in the firing pin unit or surrounding the firing pin channel.

A jammed firing pin might result from improper lubrication of the firing pin or its associated elements. This can create excessive friction and inhibit smooth movement.

The firing pin might become trapped if the spring becomes weak or broken and is unable to push it back into place.

The Fix:

Remove the slide or upper assembly in order to dismantle the firearm. Inside the slide assembly, find the firing pin.

Check it carefully for any impediments, debris, or damage. If you spot any filth, thoroughly remove it using a brush, cloth, and the proper cleaning agent.

Put a little gun oil or lubrication on the firing pin and the parts that surround it. This can help to guarantee fluid motion and avoid sticking in the future.

5. Accuracy Issues:

Accuracy can be considerably impacted by the barrel’s quality and fit.

The factory-installed barrels for Tisas 1911 handguns are normally standard. But slight differences in manufacturing tolerances might impair the barrel’s alignment and ability to lock up with the slide.

Accuracy on a Tisas 1911 can also be impacted by the sights and the kind and calibre of ammunition used. The factory sights may not offer the best vision or perfect alignment, according to some users.

The Fix:

Make that the slide and barrel are locked together correctly. Any obvious gaps or discrepancies can be a sign that something is wrong.

Think about improving the sights. Look for sights that provide higher clarity, a clearer field of view, and possible adjustment. You may improve alignment and accuracy by upgrading to aftermarket sights.

User Feedback on Tisas 1911

Despite certain frequent problems, The Shooters Log has received a lot of favorable feedback on the Tisas 1911. The majority of users of this handgun struggle with a broken firing pin.

You may read the author’s numerous complaints about the difficulty and the broken firing pin in this post from the 1911 Forum.

To learn more about the Tisas 1911 in general, you may watch the entire video. This will encourage you to reconsider your decision before investing.

Top 3 Alternative Guns of Tisas 1911

Here are some best alternatives for the Tisas 1911:

-Employs a reversible magazine release mechanism and a 15-round staggered box magazine
-Features a hammer pin that is larger than usual and slides into a groove in the bottom of the slide.

SIG Sauer P365
-10, 12, 15, or 17-round double-stack magazines can be paired with the polymer grip.
-The P365 has lowest bore-axis ratio of any commercially manufactured pistol.

Browning Hi-power
– Standard Hi-Powers have a single-action design as the basis of it.
– A single-action pistol’s hammer needs to be cocked in order to fire.

Frequently Asked Questions (FAQs)

How precise is a Tisas 1911?

The Tisas 1911 is just as accurate as the majority of GI weapons.

What is the frame finish and material of the Tisas 1911?

Both stainless steel.

Are 1911 pistols made by Tisas appropriate for beginners?


What is the action type in the Tisas 1911?

The 1911 is a single-action, magazine-fed, semi-automatic, recoil-operated handgun.

Are Tisas 1911 guns compatible with aftermarket parts and accessories?


How much does the Tisas 1911 cost?

A Tisas 1911 pistol is currently worth an average price of $513.09 new and $385.79 used.

1 comment
  1. Not trying to be rude but every single item listed as problems with the Tisas 1911 are all very most likely shooter induced problems and not a issue inherent with the firearm. All these issues come down to improper grip, improper cleaning, limp wristing and just not being a good shooter yet. If you get hammer bite with the extended beaver tail then I don’t even want to see how horrible and improper that grip is. I have 2 Tisas 1911s and I’m a advanced shooter and a certified Instructor and I’ve ha d nothing but perfect function and accuracy with it. Also saying it’s hard to rack is almost comical. It’s one of the easiest slides to rack that I’ve ever own. I understand the reason for the writing and you did acknowledge that all of these issues can be shooter induced but it’s most likely 95% shooter wrong doing.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts