The latest rendition of Smith & Wesson in their micro-compact category is the CSX. The CSX is an aluminum-framed micro 9mm handgun with the highest magazine capacity in its class.
The most common problems with the Smith & Wesson CSX include false reset on the trigger, swell magazine, heavy trigger, wiggly front strap, design.
This article includes the solutions to these problems. The current user experiences with this gun have also been provided. Read the entire article to explore the Smith & Wesson CSX problems and their solutions.
Features and Specifications of Smith and Wesson CSX:
- Grip : Interchangeable Backstraps
- Product weight : 19.5 ounces
- Safety : Ambidextrous ManualThumb Safety
- Product length : 6.1 inches
- Magazine capacity : 10+1, 12+1
- Barrel length : 3.1inches
- Barrel Material : Stainless Steel with Armornite Finish
- Slide Material : Stainless Steel with Armornite Finish
Common Henry Smith and Wesson CSX Problems and Solutions
| Problems | Solutions |
| False Reset on the Trigger | Call Smith & Wesson for troubleshoot. |
| Magazine Problem | Troubleshoot. |
| Heavy Trigger | Completely disassemble and lubricate the trigger. |
| Wiggle Front Strap | Superglued the wiggle front strap. |
| Grip problem | Covered with texture. |
| Poor Takedown Design | Increase the length of the disassembly pin. |
| Movable Grip Sleeve | Superglued the movable grip sleeve. |
1. False Reset on the Trigger:
Many users of CSX have complained about the false reset on the trigger issue of CSX. To restore the trigger to its reset position after firing a shot needs effort.
In rapid firing, the CSX missed the reset almost every time and pulled back on a trigger that had not been primed yet.
The CSX lacks sufficient spring tension to propel your finger to the reset position when released. You cannot just relax your finger and allow the spring tension of the trigger to reset it.
The Fix:
Calling Smith & Wesson may be your only option in this situation. They must improve their product and prioritize quality assurance.
2. Magazine Problem:
Even though the magazine capacity of the CSX is 12 rounds, when the ammo was inserted, the 12-round magazine especially would not seat in the grip. And then, it is also quite difficult to release the magazine.
The reason is that Smith & Wesson has made some changes to their magazine. They have decided to alter how the follower clips onto the spring of the magazine.
In CSX magazine, a spring leg spans the top coil at a 90° angle. The follower has a hole for the spring leg. Then the follower is inserted into the tube. Then they attached the base plate.
The issue is that Smith and Wesson’s magazine assembly team is not necessarily putting that little leg of the spring into the follower’s hole.
Therefore, the magazine’s spring becomes so long that you cannot get enough rounds into the gun at the stated capacity without having the magazine tube deform and get wider and swell up.
The Fix:
To resolve the issue, you must redesign the magazine.
First, clip the follower into the top coil of the magazine spring’s coil-up configuration. The assembly is then placed into the magazine tube.
Finally, attach the base plate to reassemble the gun.
3. Heavy Trigger:
The trigger on CSX is a little bit heavy. It is heavier than it needs to be considering it has manual safety and trigger safety.
Smith & Wesson is clocking the trigger of CSX pulled from the bottom-middle at 7 to 8 lbs. on a gun that is about 19.5 ounces.
The Fix:
Remove the slide and test the function of the trigger bar without the slide. Make sure it is not hanging up. Additionally, re-lubricate and examine the disconnector.
It may also be wise to examine the striker channel. Complete disassembly and lubrication will solve your problem.
4. Wiggle Front Strap:
Although it is a pretty rare issue, the CSX front strap has received some negative feedback from customers. After only a short time of use, the front strap of the CSX began to wiggle.
The wiggly front strap creates an annoying distraction when firing. This will not facilitate a comfortable grip.
The Fix:
The wiggly front strap can be permanently fixed by using super glue. Furthermore, you can adjust the texture to get a better gripping experience.
5. Grip Problem:
The texture of the grip is one of the aspects of CSX that people complain about. In particular, the portion that is made entirely of aluminum.
Even though the backstrap is interchangeable, this grip is unpleasant and causes imprecise firing.
The Fix:
The gripping problem can be solved by covering the entire surface in a texture to improve grip. You may expect to pay approximately $20 for it.
6. Movable Grip Sleeve:
People have issues with CSX because of its moveable grip sleeve on the 12-round magazine. This might not cause any significant shooting issues, but it will give you an awful experience.
This is problematic when carrying the magazine with a magazine carrier. It causes your finger to be pinched between the magazine’s sleeve and base plate.
The Fix:
The issue can be solved by simply supergluing the grip sleeve and the baseplate of the magazine.
User Feedback on Smith and Wesson CSX
The Smith & Wesson CSX is one of the most recently introduced guns on the market. It has received mixed feedback from users. Some people are still encountering issues, while others are becoming accustomed to it after using them for some time.
Although users paid approximately $600 for this gun, Smith & Wesson did not equip it with the most advanced features. A gun in this price range should be optics-ready.
Many CSX users are complaining about the magazine issues of CSX. The magazine swelling problems and the false reset on the trigger are the two most comprehensive issues the users have complained about.
In addition, some silly issues have made the users dissatisfied with CSX. Such as the wiggly front strap, the heavy trigger issue, and the gripping issue. However, these issues are easily solvable.
Top 3 Alternative Guns of Smith and Wesson CSX
Smith & Wesson M&P Shield 9mm
The Smith & Wesson M&P 9 mm is a semi-automatic concealed hammer, a lock-breech weapon that is a compact gun.
Both the CSX and the M&P Shield 9mm are compact guns. Also, the 9mm bullet and stainless-steel barrel and slide make the Smith & Wesson M&P Shield 9 mm an appropriate alternative to the Smith & Wesson CSX.
GLOCK 26 Gen5 9mm
The GLOCK 26 Gen5 has a GLOCK Marksman Barrel (GMB) with polygonal rifling and an enhanced barrel crown.
Both the CSX and the GLOCK 26 Gen5 are 9mm compact guns. Also, the similar comparable features make the GLOCK 26 Gen5 a perfect alternative to the Smith & Wesson CSX.
Smith & Wesson M&P 22 Compact
The M&P 22 is a semi-automatic gun with a manual safety that can be used by either hand and a reversible manual release.
The CSX closely resembles the M&P 22 compact. Therefore, the Smith & Wesson M&P 22 Compact is a very good alternative to the Smith & Wesson CSX.
Frequently Asked Questions (FAQs)
When did Smith & Wesson Release the CSX?
Smith & Wesson introduced the CSX in January of 2022.
What Distinguishes the CSX from Other Micro-compact Guns?
The CSX is a model which efficiently uses the space. It can hold a surprising number of rounds despite its compact size.
How Can the Smith & Wesson CSX False Reset Problem Be Fixed?
A slight increase in spring tension is needed to reset the trigger and fix the false reset problem.
Why is the Smith & Wesson CSX Movable Grip Sleeve a Bad Idea?
There is a potential for pinching your hand when reloading the 12-round magazine because of the movable grip sleeve. The grip sleeve spacer of the 12-round magazine fits loosely and might fall out.
Conclusion
After reading this article you will be able to find out the causes of the Smith & Wesson CSX problems. Also, you will be able to fix the problem for CSX.
Even if the CSX is not an extraordinary gun, it is nonetheless a good one. If you wish to pick up a hammer-fired and micro-compact handgun with safety features, the CSX is the gun for you.
