Before I move on to the problems and the steps to getting these Taurus Raging Hunter problems fixed, let\u2019s look at the specs of the revolver.<\/p>\n\n\n\n
Features & Specifications of the Taurus Raging Hunter:<\/strong><\/p>\n\n\n\n Below is a table of the problems regarding the gun as well as the steps to Taurus Raging Hunter troubleshooting.<\/p>\n\n\n\n Quick Overview of the Problems and Solutions<\/strong><\/p>\n\n\n\n The Taurus Raging Hunter has a reputation for developing timing issues. When a revolver develops timing issues, this means that the cylinder’s action is slightly off.<\/p>\n\n\n\n So, it is no longer properly aligned with the barrel and may not be rotating all the way into a locking position.<\/p>\n\n\n\n The gun needs to be properly assembled, with parts fitted as required. Cylinder timing is a delicate thing that must be carefully checked, with subtle adjustments made, during the assembly process.<\/p>\n\n\n\n However, if you notice that any part has been damaged during the disassembly procedure, it is advised to get your firearm checked and serviced from Taurus.<\/p>\n\n\n\n Taurus is notorious for its quality control. Most Taurus products suffer as a result. Such as the Taurus Raging Bull. It may face internal damage if +P ammo is used.<\/p>\n\n\n\n Even though it is rated for +P ammo, it is not advised to use them on a regular basis. As using them for a prolonged period may cause internal damage to the gun and its components.<\/p>\n\n\n\n In case any part has been damaged due to the powerful ammo, you should send it to Taurus in order to get those parts replaced.<\/p>\n\n\n\n Sometimes users may find that the bullets do not fit the barrel properly, or face severe resistance while traveling through the barrel.<\/p>\n\n\n\n Especially with the 454 Casull ammunition. This is due to the build-ups within the surface of the barrel.<\/p>\n\n\n\n The solution is to clean your barrel periodically and make sure that no build-up gets to accumulate within the barrel. As it could create resistance for the bullet during travel and further damage the barrel.<\/p>\n\n\n\n This is somewhat a rare issue for the Taurus Raging Hunter, but not an impossible one. Users may find that the cylinder on their Raging Hunter has stopped working entirely.<\/p>\n\n\n\n But the sad news is, that most parts for the gun are not available on the market for general users. As Taurus believes that they hold the final verdict on their product.<\/p>\n\n\n\n As mentioned above, the general parts for the Taurus Raging Hunter are not quite available on the market. Hence, your best and only course of action has to be to send it to Taurus.<\/p>\n\n\n\n Although they have a bad reputation for their aftermarket service, there is nothing much to do without spare parts. If luckily you come by spare parts for the revolver assembly, you may take a gamble on getting it fixed yourself.<\/p>\n\n\n\n The Taurus Raging Hunter is known to have a tight trigger. This is not necessarily a problem. But some users deem it to be one. While some prefer a heavier trigger, some don\u2019t.<\/p>\n\n\n\n Hence one may manipulate or swap the springs to reduce some of that stiffness to make the trigger slightly easier to pull by the shooter.<\/p>\n\n\n\n The main spring and the trigger spring may be replaced if the user requires them to be replaced. There are two different springs here that may help you reduce the recoil.<\/p>\n\n\n Fig 1- Taurus Raging Thunder Main Spring<\/p>\n\n\n\n The first one is the main spring and the second one is the trigger spring (Fig 1). If necessary, the user may need to disassemble the gun and replace these two springs to elevate the issue.<\/p>\n\n\n\nTaurus Raging Hunter Specs<\/strong><\/td><\/tr> Cartridge<\/strong><\/td> 44 MAG\/357 Mag\/38 Spl +P\/ 454 Casull\/460 S&W Magnum<\/td><\/tr> Capacity<\/strong><\/td> 6\/7 Rounds<\/td><\/tr> Barrel Length<\/strong><\/td> 5.12\/6.75\/8.37 Inches<\/td><\/tr> Weight<\/strong><\/td> 49 to 55 Ounces (Unloaded)<\/td><\/tr> Length<\/strong><\/td> 10.9 to 14.9 Inches<\/td><\/tr> Width<\/strong><\/td> 1.80 to 1.92 Inches<\/td><\/tr> Height<\/strong><\/td> 6.40\/6.50 Inches<\/td><\/tr> Safety<\/strong><\/td> Transfer-Bar<\/td><\/tr> Sights<\/strong><\/td> Adjustable Rear Sights<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n ![\"Common](\"https:\/\/gunanalyst.com\/wp-content\/uploads\/2022\/08\/Taurus-Raging-Hunter-.webp\")
Common Taurus Raging Hunter Problems and Solutions<\/h2>\n\n\n\n
Taurus Raging Hunter Problems<\/strong><\/td> Solutions<\/strong><\/td><\/tr> Timing Issues<\/strong><\/td> Properly cleaning and assembling the gun<\/td><\/tr> Internal Damage<\/strong><\/td> Avoiding +P ammo<\/td><\/tr> Improper Bullet Fit<\/strong><\/td> Cleaning the cylinders periodically<\/td><\/tr> Cylinder Not Working<\/strong><\/td> Servicing from Taurus<\/td><\/tr> Tight Trigger<\/strong><\/td> Swapping the springs<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 1. Timing Issues:<\/h3>\n\n\n\n
Solution:<\/h4>\n\n\n\n
2. Internal Damage:<\/h3>\n\n\n\n
Solution:<\/h4>\n\n\n\n
3. Improper Bullet Fit:<\/h3>\n\n\n\n
Solution:<\/h4>\n\n\n\n
4. Cylinder Not Working:<\/h3>\n\n\n\n
Solution:<\/h4>\n\n\n\n
5. Tight Trigger:<\/h3>\n\n\n\n
Solution:<\/h4>\n\n\n\n
![\"](\"https:\/\/gunanalyst.com\/wp-content\/uploads\/2022\/08\/image-71-1.webp\")