{"id":549,"date":"2022-08-02T10:54:28","date_gmt":"2022-08-02T10:54:28","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=549"},"modified":"2022-08-04T08:29:22","modified_gmt":"2022-08-04T08:29:22","slug":"taurus-tcp-380-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/taurus-tcp-380-problems\/","title":{"rendered":"Taurus TCP 380 Problems You Should Know"},"content":{"rendered":"\n

The Taurus PT 738 is also known as the TCP 380. TCP stands for Taurus Compact Pistol. This is the lightest gun from Taurus. If you want a very lightweight semi-automatic pistol, this gun is perfect for you.<\/p>\n\n\n\n

However, people face a few common problems with the Taurus TCP 380. Some of the most typical Taurus TCP 380 problems are slide jamming, tiny grip, difficulty pulling the slide, slide hanging up, and failure to feed.<\/strong><\/p>\n\n\n\n

In this article, I’ll describe these issues and the best Taurus TCP 380 troubleshooting methods. Now, let’s look at some of the specifications of this handgun.<\/p>\n\n\n\n

Features & Specifications of Taurus TCP 380 Gun:<\/strong><\/p>\n\n\n\n

Taurus TCP 380 Specs<\/strong><\/td><\/tr>
Cartridge<\/strong><\/td>.380 ACP<\/td><\/tr>
Capacity<\/strong><\/td>6 + 1 Rounds<\/td><\/tr>
Barrel Length<\/strong><\/td>2.84 Inches<\/td><\/tr>
Weight (Unloaded)<\/strong><\/td>10.20 Ounces or 289.16 Grams<\/td><\/tr>
Length<\/strong><\/td>5.25 Inches<\/td><\/tr>
Width<\/strong><\/td>0.80 Inches<\/td><\/tr>
Height<\/strong><\/td>3.25 Inches<\/td><\/tr>
Safety<\/strong><\/td>Loaded Chamber Indicator, Taurus Security System (TSS)<\/td><\/tr>
Sights<\/strong><\/td>Front \u2013 Low-Profile Fixed Rear \u2013 Low-Profile Fixed<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n
\n
\"Common
Taurus TCP 380<\/figcaption><\/figure><\/div>\n\n\n

Common Taurus TCP 380 Problems and Solutions<\/h2>\n\n\n\n

To learn how to solve the issues, look at the table below. Follow the solution methods given below to get your Taurus TCP 380 problems fixed.<\/p>\n\n\n\n

Quick Overview of the Problems and Solutions<\/strong><\/p>\n\n\n\n

Problems with Taurus TCP 380<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Slide Jamming<\/strong><\/td>Apply force on the barrel with a rubber mallet.<\/td><\/tr>
Tiny Grip<\/strong><\/td>Install a 1 or 1.25-inch grip extension as suggested.<\/td><\/tr>
Difficult to Pull the Slide<\/strong><\/td>Lock the slide open before inserting a new magazine.<\/td><\/tr>
Slide Hanging Up<\/strong><\/td>Bend the feed lips of the magazine outwards slightly.<\/td><\/tr>
Failure to Feed<\/strong><\/td>File down the small switch as shown.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Slide Jamming:<\/h3>\n\n\n\n

The Taurus TCP 380’s slide tends to freeze up. This might develop when attempting to put the pistol back together after it has been taken apart.<\/p>\n\n\n\n

The slide may become jammed if you pull it back to secure it. You won’t be able to move it easily as a consequence.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

You have to fix this issue by applying pressure. You must specifically strike the barrel with a heavy object.<\/p>\n\n\n\n

You may tap the barrel with a rubber mallet to reposition it. Then, take out the slide from the frame.<\/p>\n\n\n\n

Be careful to start by using little force. Hard blows to the barrel may result in permanent harm.<\/p>\n\n\n\n

2. Tiny Grip:<\/h3>\n\n\n\n

The Taurus TCP 380 has an exceptionally tiny grip. Although this is a compact gun for use in short range, you still need a firm grip to avoid limp wristing.<\/p>\n\n\n\n

Also, your pinky finger will hang even if you have a small hand. As a result, you might have issues with the accuracy and drawing.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

If you do not feel comfortable holding the Taurus TCP 380 with your pinky dangling, you should get a grip extension.<\/p>\n\n\n\n

This 1.25-inches grip extension for the Taurus PT 738 TCP 380<\/a> will be a perfect fit. You can also look at the AmeriGun Club Grip Extension<\/a> from Amazon. Installing some grip tapes may also help.<\/p>\n\n\n\n

3. Difficult to Pull the Slide:<\/h3>\n\n\n\n

After refilling the magazine, you might find it challenging to pull on the slide. This may happen with both of the magazines.<\/p>\n\n\n\n

New users of the pistol may become confused by the inconsistent force needed to draw the slide. However, the slide will feel normal to pull again once one round has been fired.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

You must lock the slide open before inserting the entire magazine to solve this problem. You must release the slide once the magazine has been inserted. This will make the initial slide pull with a full magazine seem natural.<\/p>\n\n\n\n

After purchasing the gun, you should also give it a complete cleaning and lubrication. The difficulties disappear once the springs have had time to break in.<\/p>\n\n\n\n

Keeping the gun loaded for a couple of days may also help to lessen this issue.<\/p>\n\n\n\n

4. Slide Hanging Up:<\/h3>\n\n\n\n

The slide may hang up after inserting the magazine into the chamber and pulling the slide.<\/p>\n\n\n

\n
\"Slide
Slide Hanging Up<\/figcaption><\/figure><\/div>\n\n\n

Fig 1 – Slide Hanging Up<\/p>\n\n\n\n

This is how it will appear when the slide hangs up (Fig 1). After being released, the slide might take a while to return to its original position. This issue has been reported by several Taurus TCP 380 users.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

You need to pull the magazine out first. Get a little set of pliers now. This small-sized plier<\/a> may be used to modify the magazine.<\/p>\n\n\n\n

You must now bend the magazine’s feed lips on both sides. They should be slightly bent outward, but not too much. After bending, examine the slide.<\/p>\n\n\n\n

You should bend it a little bit further if the issue persists.<\/p>\n\n\n\n

5. Failure to Feed:<\/h3>\n\n\n\n

The Taurus TCP 380 may have trouble with feeding. The following round won’t be put into the firing chamber as a consequence.<\/p>\n\n\n\n

If this problem occurs in an emergency, you won\u2019t be able to shoot the gun.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

Firstly, take off the slide of the Taurus TCP 380.<\/p>\n\n\n

\n
\"Switch
Switch and Magazine<\/figcaption><\/figure><\/div>\n\n\n

Fig 2 – Switch and Magazine<\/p>\n\n\n\n

Now, you will notice a small switch beside the magazine (Fig 2).<\/p>\n\n\n

\n
\"
Filing the Switch<\/figcaption><\/figure><\/div>\n\n\n

Fig 3 – Filing the Switch<\/p>\n\n\n\n

You have to file the switch using a filer. Slowly file the edges of the switch down (Fig 3).<\/p>\n\n\n

\n
\"Result
Result After Filing<\/figcaption><\/figure><\/div>\n\n\n

Fig 4 – Result After Filing<\/p>\n\n\n\n

Keep filing and testing out the gun until it feeds smoothly (Fig 4).<\/p>\n\n\n\n

\n