Features & Specifications of S&W Shield 40 Gun:<\/strong><\/p>\n\n\n\n The feed ramp of the S&W Shield 40 can become damaged. If this happens, it can cause the round to nosedive. As a result, the ammo hits the top of the chamber.<\/p>\n\n\n\n This issue fails to feed. It can also happen due to a deformed or damaged chamber. If the chamber is dirty or damaged, it creates friction. So, you will face an FTF issue.<\/p>\n\n\n\n To fix this issue, disassemble your S&W Shield 40. Now, clean it thoroughly. After finishing cleaning and getting rid of the factory lube, apply some new lubrication.<\/p>\n\n\n\n If you notice that the chamber is damaged, you will need a replacement. Also, inspect the feed ramp for any signs of damage. If the feed ramp has also been deformed, you should take your S&W Shield 40 to a gunsmith.<\/p>\n\n\n\n Many people face a problem with their stock magazines. When shooting the S&W Shield 40, the magazine may be released. This causes stovepiping in the gun.<\/p>\n\n\n\n If you have bought the gun recently and facing this issue, the problem may be an incorrect fit with the magazine. But, if you have shot more than 1000 rounds, there might be an issue with the magazine spring or catch.<\/p>\n\n\n\n A weak magazine spring may cause the problem to occur. The magazine spring can deteriorate due to age to excessive use. Also, the magazine catch may become damaged due to wear and tear.<\/p>\n\n\n\n Check the magazine’s fit first. Make that there is no play and that it fits tightly into the S&W Shield 40. The magazine might need to be replaced if it is loose in its position.<\/p>\n\n\n\n If the magazine spring is weak, replace it. The majority of gun shops sell new magazine springs.<\/p>\n\n\n\n You should also look for damage in the magazine catch. You will need to contact a skilled gunsmith to replace the magazine catch if it is damaged.<\/p>\n\n\n\n There have been some rare cases where the S&W Shield 40 blew up while shooting. Before the catastrophic event, the gun also jams up every once in a while.<\/p>\n\n\n\n The company states that this issue only happens due to defective ammo. But, this dangerous issue can also occur due to a damaged barrel. Also, excessive pressure inside the chamber may deform the chamber.<\/p>\n\n\n\n Using defective ammo with the S&W Shield 40 can also cause an extreme amount of pressure.<\/p>\n\n\n\n You should always inspect the barrel or the chamber for any sign of damage. If they are damaged, and you use defective ammo with them, you will be in danger.<\/p>\n\n\n\n You should also use high-quality ammo only. Do not use cheap ammo bought from local gun shops. If you are facing issues such as jamming, you should be cautious.<\/p>\n\n\n\n If you have a new S&W Shield 40, the trigger might lock up a little bit. This is a major concern to some users. The main reason for this issue is that the gun has not been broken into.<\/p>\n\n\n\n But, if you are suddenly experiencing this issue, it might be due to too much dry firing. If you dry-fire the gun often, the trigger components wear down.<\/p>\n\n\n\n Also, not cleaning the gun and the trigger mechanism properly might result in dirt inside it. This also causes the trigger to jam up.<\/p>\n\n\n\n You should break in the S&W Shield 40\u2019s trigger to resolve a jammed and unpleasant trigger: Shooting a new trigger is the ideal technique to break it in. The trigger will become smoother the more you shoot it.<\/p>\n\n\n\n Additionally, you must frequently lubricate and clean the trigger’s parts. This will clear them of any dirt or debris that might be clinging to them.<\/p>\n\n\n\n After cleaning and lubricating the trigger parts, you might attempt polishing them if they are still gritty. The surfaces of the components will be smoothed out as a result.<\/p>\n\n\n\n The slide of the S&W Shield 40 might become hard to rack. This mainly happens due to a weak recoil spring. If the spring has become weak, you might face this issue.<\/p>\n\n\n\n Also, there have been issues with the new S&W Shield 40s that had this issue. Since the gun has not been shot enough times, it seems to be stiff. A weak grip may also result in difficulty racking the slide.<\/p>\n\n\n\n You should break in the slide of a new S&W Shield 40 to solve a stiff slide. Additionally, you must lubricate the slide and clean it. It may be simpler to rack the slide and experience less friction if you use a slide lubricant.<\/p>\n\n\n\n Check whether the recoil spring of your S&W Shield 40 is weak. You can solve the problem by changing the recoil spring to a new one.<\/p>\n\n\n\n There have been mixed reviews on the S&W Shield 40 on the internet. Many gun lovers have never experienced any major issue with the gun. There have also been some examples of a lemon.<\/p>\n\n\n\n In this post from The High Road<\/a>, one user said that the magazines on his S&W Shield 40 were too hard to load. He had to lay the gun on its slide and apply a lot of pressure to insert the magazine.<\/p>\n\n\n\n A user has said that he had experienced misfiring issues with his gun. In this video on YouTube<\/a>, you can see that the Shield 40 does not shoot if the magazine is pushed sideways.<\/p>\n\n\n\nCaliber<\/strong><\/td> .40 S&W.<\/td><\/tr> Capacity<\/strong><\/td> 6+1, 7+1.<\/td><\/tr> Barrel Length<\/strong><\/td> 3.1 Inches<\/td><\/tr> Weight (Unloaded)<\/strong><\/td> 19.0 Ounces<\/td><\/tr> Length<\/strong><\/td> 6.1 Inches<\/td><\/tr> Width<\/strong><\/td> 0.95 Inches<\/td><\/tr> Height<\/strong><\/td> 4.60 Inches<\/td><\/tr> Action Type<\/strong><\/td> Striker Fire<\/td><\/tr> Safety<\/strong><\/td> Manual Thumb Safety, Optional Grip Safety<\/td><\/tr> Sights<\/strong><\/td> Front Sight: Steel-White DotRear Sight: Steel-White 2-Dot<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n ![\"5](\"https:\/\/gunanalyst.com\/wp-content\/uploads\/2023\/10\/Common-SW-Shield-40-Problems-1024x536.webp\")
<\/figure>\n\n\n\nCommon S&W Shield 40 Problems and Solutions<\/h2>\n\n\n\n
Problems with S&W Shield 40<\/strong><\/td> Solutions<\/strong><\/td><\/tr> Damaged Feed Ramp<\/strong><\/td> Disassemble, clean, and lubricate the gun. Replace the damaged chamber or feed ramp.<\/td><\/tr> Magazine Releasing<\/strong><\/td> Replace the magazine if it’s loose. Replace a weak magazine spring.<\/td><\/tr> Blowing Up<\/strong><\/td> Inspect the barrel and chamber for damage. Use high-quality ammunition.<\/td><\/tr> Uncomfortable Trigger<\/strong><\/td> Break in the trigger, Clean, lubricate, and polish gritty trigger parts.<\/td><\/tr> Hard to Rack the Slide<\/strong><\/td> Consider using slide lubricant and replace a weak recoil spring.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 1. Damaged Feed Ramp:<\/h3>\n\n\n\n
<\/ol>\n\n\n\n
The Fix:<\/h4>\n\n\n\n
2. Magazine Releasing:<\/h3>\n\n\n\n
<\/ol>\n\n\n\n
The Fix:<\/h4>\n\n\n\n
3. Blowing Up<\/h3>\n\n\n\n
<\/ol>\n\n\n\n
The Fix: <\/h4>\n\n\n\n
4. Uncomfortable Trigger:<\/h3>\n\n\n\n
The Fix:<\/h4>\n\n\n\n
5. Hard to Rack the Slide:<\/h3>\n\n\n\n
<\/ol>\n\n\n\n
The Fix:<\/h4>\n\n\n\n
User Feedback on S&W Shield 40<\/h2>\n\n\n\n