{"id":3374,"date":"2022-10-15T18:05:32","date_gmt":"2022-10-15T18:05:32","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=3374"},"modified":"2023-02-25T12:30:14","modified_gmt":"2023-02-25T12:30:14","slug":"cz-p07-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/cz-p07-problems\/","title":{"rendered":"6 Most Common CZ P-07 Problems You Should Know!"},"content":{"rendered":"\n

The CZ P-07 firearm is manufactured by CZ, a globally recognized brand. The CZ P-07 is a high-performance gun with a polymer frame, 15-round magazine capacity, and double- or single-action firing.<\/p>\n\n\n\n

The CZ P-07 has several problems, the most prevalent of which are the firing pin problem, the failure to feed, the failure to eject, the double feeding problem, the slide problem, and the magazine problem.<\/strong><\/p>\n\n\n\n

This article will highlight the common issues encountered by using CZ P-07. In addition, solutions to these issues will be provided with user feedback. Read the complete article to fix your CZ P-07 problems<\/strong>.<\/p>\n\n\n\n

Features & Specifications of CZ P-07:<\/strong><\/p>\n\n\n\n

Action<\/strong><\/td>Single\/Double Action<\/td><\/tr>
Capacity<\/strong><\/td>15+1 rounds<\/td><\/tr>
Caliber<\/strong><\/td>380 Auto  <\/strong><\/td><\/tr>
Sights <\/strong><\/td>Luminescent<\/td><\/tr>
Product weight<\/strong><\/td>780 g (with empty magazine)<\/td><\/tr>
Product length<\/strong><\/td>185 mm<\/td><\/tr>
Barrel length<\/strong><\/td>95 mm<\/td><\/tr>
Frame Material<\/strong><\/td>Fiberglass-reinforced Polymer                 <\/strong><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n
\n
\"CZ
CZ P-07 Problems<\/figcaption><\/figure><\/div>\n\n\n

Common CZ P-07 Problems and Solutions<\/h2>\n\n\n\n
Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Firing Pin Problem<\/td>Use snap caps or dummy rounds.<\/td><\/tr>
Failure to Feed<\/td>Change the ammo. Clean and lubricate the gun. Replace the spring of the magazine.<\/td><\/tr>
Failure to Eject<\/td>Check the extractor. Replace the extractor if necessary.<\/td><\/tr>
Double Feeding<\/td>Troubleshoot.<\/td><\/tr>
Slide Problem<\/td>Call CZ.<\/td><\/tr>
Magazine Problem<\/td>Replace the magazine.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Firing Pin Problem:<\/h3>\n\n\n\n

Many customers have complained that the P-07 firing pin or the retaining pin is seriously deformed. There are many reasons that can cause this problem.<\/p>\n\n\n\n

While dry firing with this gun, the firing pin, instead of striking the primer of the cartridge, strikes the shoulder of the chamber wall and eventually breaks the wall.<\/p>\n\n\n\n

The other possible reason for this problem might be using the gun for a long time without the maintenance of the firing pin.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

For dry firing, snap caps or dummy rounds can be used to prevent damage to the firing pin.<\/p>\n\n\n\n

They are crucial for preventing damage to the firing pin while using dry firing.<\/p>\n\n\n\n

After a few hundred rounds of service, the gun’s firing pin should be thoroughly inspected and cleaned. If the firing pin has already been deformed, it must be replaced.<\/p>\n\n\n\n

\"<\/figure>\n\n\n\n

2. Failure to Feed:<\/h3>\n\n\n\n

Many P-07 users have complained about the difficulty of feeding their firearms.<\/p>\n\n\n\n

It’s one of the most common complaints with this pistol after shooting thousands of rounds, particularly with FMJ.<\/p>\n\n\n\n

Another possible cause of the feeding problem is that the gun is dirty. Sometimes, the magazine is also to blame for the problem with feeding.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

If the problem is caused by a certain kind of ammunition, switch to other ammunition that is compatible with your gun.<\/p>\n\n\n\n

If the issue occurs with all types of ammo, then carefully clean and lubricate the firearm.<\/p>\n\n\n\n

If it is not fixed, you may need to replace the spring of the magazine of your gun, which could be causing the bullets to slide down instead of loading into the chamber.<\/p>\n\n\n\n

3. Failure to Eject:<\/h3>\n\n\n\n

Some P-07 users have complained about the failure to extract. After being fired, the cartridge does not always leave the chamber.<\/p>\n\n\n\n

Most of the time, this is caused by a worn extractor or a worn case on the cartridge.<\/p>\n\n\n\n

Also, the failure to eject can happen if dirt builds up inside the gun.<\/p>\n\n\n\n

The Fix: <\/h4>\n\n\n\n

To resolve the issue, taking a close look at the extractor should help you figure out what’s wrong. If dirt has built up under the extractor, you should clean it out well.<\/p>\n\n\n\n

If your extractor is broken, it would be best to get a new one.<\/p>\n\n\n\n

4. Double Feeding:<\/h3>\n\n\n\n

Some users who have encountered the failure to eject issue have also experienced the double feeding issue.<\/p>\n\n\n\n

It may be the result of an existing failure to eject the problem. It may also be caused by a bad magazine spring.<\/p>\n\n\n\n

It occurs when the extractor fails to remove the brass from the chamber, yet the slide still attempts to feed the top round from the magazine into the chamber.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

If you\u2019re already in this circumstance, follow the instructions below.<\/p>\n\n\n\n