{"id":2669,"date":"2022-10-05T18:27:32","date_gmt":"2022-10-05T18:27:32","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=2669"},"modified":"2022-10-05T23:15:28","modified_gmt":"2022-10-05T23:15:28","slug":"rock-island-10mm-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/rock-island-10mm-problems\/","title":{"rendered":"6 Rock Island 10mm Problems You Should Know About"},"content":{"rendered":"\n

The RIA 10mm guns come with a variety of distinguishing features, including exceptional durability, ergonomics, and accuracy. Their user-friendly ergonomics, high-quality construction, exceptional accuracy, dependability, and reasonable pricing make it an excellent choice for anybody searching for a self-defense handgun.<\/p>\n\n\n\n

With Rock Island 10mm guns, you will also have to face problems like a heavy weight, slide lock, sharp edge, jamming, and ejector issues. <\/strong>But don’t worry, in this piece, I’ll go into depth about the common Rock Island 10mm problems and their solutions. But first, let’s go through the specifications.<\/p>\n\n\n\n

Features & Specifications of Rock Island 10mm:<\/strong><\/p>\n\n\n\n

Caliber<\/strong><\/td>10mm <\/strong><\/td><\/tr>
Grip<\/strong><\/td>Black\/white G10<\/strong><\/td><\/tr>
Weight<\/strong><\/td>46.8 oz<\/strong><\/td><\/tr>
Capacity<\/strong><\/td>8+1 rounds<\/strong><\/td><\/tr>
Finish<\/strong><\/td>Parkerized  <\/strong><\/td><\/tr>
Sight<\/strong><\/td>White dot adjustable rear, fiber-optic front  <\/strong><\/td><\/tr>
Trigger pull<\/strong><\/td>5.75lbs <\/strong><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"Rock
Rock Island 10mm Problems<\/figcaption><\/figure>\n\n\n\n

Common Rock Island 10mm Problems and Solutions<\/h2>\n\n\n\n
Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Weighs heavy<\/td>Use lightweight loads<\/td><\/tr>
Recoil spring issue<\/td>Replace with a stronger one<\/td><\/tr>
The slide won’t lock<\/td>Check gas block screw and recoil spring<\/td><\/tr>
Sharp edges<\/td>Use stone to soften the edges<\/td><\/tr>
Jamming<\/td>Try different combinations of magazine\/ammunition\/extractor<\/td><\/tr>
Ejection issue<\/td>Change magazine, replace extractor<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Weighs Heavy<\/h3>\n\n\n\n

Guns are heavy because they must retain the power of the powder on fire in the chamber, as well as the huge loads in the barrel owing to the propellant and friction of the bullet going through it.<\/p>\n\n\n\n

Then there’s the matter of the weight of the ammunition. A fully loaded magazine accounts for a significant portion of the weight of a handgun, accounting for around 20% of the overall weight.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

There is not much to do except use lightweight loads. Still then, the result might not be satisfactory. Another solution could be replacing parts with aftermarket pieces.<\/p>\n\n\n\n

But you will have to be very careful not to disturb the equilibrium. Remember, this practice is not recommended.<\/p>\n\n\n\n

2. Recoil Spring Issue<\/h3>\n\n\n\n

It has been demonstrated that a recoil spring that is too light might induce irregular lock-up, resulting in decreased accuracy. In this pistol, RIA employed a lightweight 20lbs spring, which resulted in lesser accuracy.<\/p>\n\n\n\n

For any semi-auto to be accurate, the barrel must reliably lock up from shot to shot.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

The fix for this problem is to replace the recoil spring. You could install stronger springs like a 23lbs spring if that fits your requirement. But, you will have to make sure it fits the system.<\/p>\n\n\n\n

Here is a video<\/a> on how to change the recoil spring at home.<\/p>\n\n\n\n

3. Slide Won\u2019t lock<\/h3>\n\n\n\n

This issue is caused by loose gas block screws, which reduce the bolt’s stroke. This is why some models frequently failed to lock back slides.<\/p>\n\n\n\n

It might be a bolt stop issue since it should engage the back of the mag follower and keep the bolt from sliding forward, but it could also be jammed or rounded off.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

The simplest method to avoid this issue is to test the pistol before purchasing it.<\/p>\n\n\n\n

If you do encounter this issue, you have two options. Because this problem is caused by the gas block screw becoming short, replacing the screw as it wears out will remedy the problem. You also add a stronger buffer spring.<\/p>\n\n\n\n

4. Sharp Edges<\/h3>\n\n\n\n

The thumb safety is quite sharp; it should be loosened and the edges softened or replaced. Furthermore, the majority of the edges on this rifle are so sharp that it is downright uncomfortable.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

However, the sharp edges may be readily removed using a fine-grain stone, which can be obtained at any gunsmith supply store.<\/p>\n\n\n\n

Simply drag the stone down each edge softly to break the razor edge, or repeat multiple times to add a bevel or radius to the edge.<\/p>\n\n\n\n

The sliding serrations must be done with extreme caution since it is simple to cause collateral damage. The serration’s flat bottom must be blocked off, otherwise, the stone will leave scrape scratches on the flat surface.<\/p>\n\n\n\n

5. Jamming<\/h3>\n\n\n\n

Jamming can be caused by a number of things. Because of the weapon’s poor manufacturing, components may stick or snag on one another.<\/p>\n\n\n\n

Poor maintenance causes excessive accumulation, which can cause components to stick.<\/p>\n\n\n\n

Cheap ammunition can speed up this process or even leave fragments behind that can become trapped in moving components and cause the weapon to bind.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

Ammunition, magazines, and extractors are the most common reasons for firearm jams. Experiment with different combinations and alter them.<\/p>\n\n\n\n

If this does not resolve the issue, it is most likely a design error, and you should contact the manufacturer.<\/p>\n\n\n\n

6. Ejection Issue<\/h3>\n\n\n\n

Some empty shells will become stuck up in the ejection port, while others will not. On an empty mag, the slide would lock back and the case would be partially torn.<\/p>\n\n\n\n

In this circumstance, it is possible that the fired case slips down and is pulled back into the magazine’s feed lips. The slide then advances and crushed the case against the barrel hood.<\/p>\n\n\n\n

The Fix:<\/h4>\n\n\n\n

Trying changing the magazine, Wilson Combat 47NX is recommended. Send it to RIA for repair. The extractor probably needs to be replaced.<\/p>\n\n\n\n

If you are experienced in assembling and disassembling handguns then you can do this at home. Here is how to replace an extraction<\/a>.<\/p>\n\n\n\n

\n