{"id":256,"date":"2022-08-22T15:23:32","date_gmt":"2022-08-22T15:23:32","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=256"},"modified":"2022-09-04T17:44:56","modified_gmt":"2022-09-04T17:44:56","slug":"beretta-tomcat-3032-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/beretta-tomcat-3032-problems\/","title":{"rendered":"6 Beretta Tomcat 3032 Problems You Should Know"},"content":{"rendered":"\n

The Beretta Tomcat 3032 is a semi-automatic pocket pistol. It also has another variant called the Beretta 3032 Tomcat Inox, which comes with a stainless steel barrel.<\/p>\n\n\n\n

There are quite a few Beretta Tomcat 3032 problems that must be addressed to get the most out of it. I will also discuss strategies to get these Beretta Tomcat 3032 problems fixed.<\/p>\n\n\n\n

The Beretta Tomcat 3032 is infamous for its cracked frame. Along with other issues such as the stiff slides, rounds jamming, feeding issues, broken firing pin, etc.<\/strong><\/p>\n\n\n\n

But before I begin, let\u2019s take a quick peek at the specifications of the Beretta 3032 Tomcat.<\/p>\n\n\n\n

Features & Specifications of the Beretta Tomcat 3032:<\/strong><\/p>\n\n\n\n

Beretta Tomcat 3032 Specs<\/strong><\/td><\/tr>
Cartridge<\/strong><\/td>7.65 (32 Auto)<\/td><\/tr>
Capacity<\/strong><\/td>7 Rounds<\/td><\/tr>
Barrel Length<\/strong><\/td>2.4 Inches<\/td><\/tr>
Weight<\/strong><\/td>14.5 Ounces (Unloaded)<\/td><\/tr>
Length<\/strong><\/td>4.92 Inches<\/td><\/tr>
Width<\/strong><\/td>1.1 Inches<\/td><\/tr>
Height<\/strong><\/td>3.7 Inches<\/td><\/tr>
Safety<\/strong><\/td>Frame-Mounted Thumb Safety<\/td><\/tr>
Sights<\/strong><\/td>Fixed Low-Profile Sights<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n
\n
\"Common
tomcat 3032 <\/figcaption><\/figure><\/div>\n\n\n

Common Beretta Tomcat 3032 Problems and Solutions<\/h2>\n\n\n\n

While most of these issues can be fixed, the cracked frame might be something that you may have to learn to live with. Further discussions regarding the Beretta Tomcat 3032 troubleshooting are provided below.<\/p>\n\n\n\n

Quick Overview of the Problems and Solutions<\/strong><\/p>\n\n\n\n

Beretta Tomcat 3032 <\/strong>Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Cracked Frame<\/strong><\/td>Using low-energy ammunition<\/td><\/tr>
Stiff Slides<\/strong><\/td>Loading with the tip-up barrel<\/td><\/tr>
Jamming<\/strong><\/td>Eliminating limp wrists, trying different ammo, cleaning the barrel<\/td><\/tr>
Feeding Problem<\/strong><\/td>Replacing\/cleaning magazines, using FMJ ammo<\/td><\/tr>
Broken Firing Pin<\/strong><\/td>Avoiding dry fires, replacing the firing pin<\/td><\/tr>
Stovepiping<\/strong><\/td>Cleaning the gun, avoiding JHP ammo<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Cracked Frame:<\/h3>\n\n\n
\n
\"Broken
Broken Frame on the Beretta Tomcat 3032<\/figcaption><\/figure><\/div>\n\n\n

The Beretta Tomcat 3032 is notorious for its frame cracking. The frame of the Tomcat is made of aluminum alloy while the slide and barrel are carbon steel.<\/p>\n\n\n\n

The aluminum frame is prone to breaking, as can be seen from the pictures above (Fig 1).<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n\n

First of all, Beretta claims that this is not a product defect. As the gun is only meant to withstand muzzle energy below 130 ft\u22c5lbf or 176 Joules.<\/p>\n\n\n\n

Firing bullets that exceed this limit can break the frame. Be sure to check the specifications properly before your buy ammo.<\/p>\n\n\n\n

And in case you have already broken your frame, sadly, Beretta does not provide any service regarding this issue. The frames are serialized and regulated, and therefore cannot be replaced or repaired<\/a>.<\/p>\n\n\n\n

2. Stiff Slides:<\/h3>\n\n\n\n

The Beretta Tomcat 3032 is a blowback pistol. And as with all blowback pistols, it also relies on the heavy recoil of the spring and the energy from the bullet to work properly. The Tomcat is no different.<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n
\n
\"Tip-Up
Tip-Up Barrel on the Beretta Tomcat 3032<\/figcaption><\/figure><\/div>\n\n\n

The Tomcat has a single- and double-action trigger mechanism. Its\u2019 prominent feature is the tip-up barrel (Fig 2).<\/p>\n\n\n\n

Users can use the tip-up barrel to load a round, and also insert a full magazine afterward. This eliminates the need for pulling or racking the slide to load a bullet into the chamber.<\/p>\n\n\n\n

3. Jamming:<\/h3>\n\n\n\n

The Beretta Tomcat 3032 is also prone to jamming. When a bullet fails to eject, it gets stuck in the barrel. And since there are no extractors on these guns, jammed rounds are a hassle to remove.<\/p>\n\n\n\n

It could be due to limp-wrists, cheap or wrong type ammo, or a dirty gun.<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n\n

Limp-wrists are a major enemy of blowback pistols. If the energy is absorbed due to a limp wrist, there may be a lack of force to eject the shell.<\/p>\n\n\n\n

One user also suggested that<\/a>, with a new Tomcat, it is better to work the slides for a while without shooting to smooth it out. And then fire around 50 rounds through the gun. And he reported it to never jam.<\/p>\n\n\n\n

The Tomcat also has to be kept properly clean and lubricated to function properly. A dirty gun can also cause jams.<\/p>\n\n\n\n

Cheap Winchester ammo can also cause the issue. One user suggested<\/a> FMJ ammo around 71-grain<\/p>\n\n\n\n

4. Feeding Problem:<\/h3>\n\n\n\n

Oftentimes alongside the jamming issue, some Tomcats can also display feeding problems. As the bullets would not cycle appropriately as they are intended to.<\/p>\n\n\n\n

Most feeding issues with semi-automatics can be tracked down to either the magazine or the ammo.<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n\n

You could try to replace the magazines with newer ones<\/a> and see whether the issue persists or not. If it does, you could try changing the ammo.<\/p>\n\n\n\n

JHP (Jacketed Hollow Point) ammo can cause issues with the Beretta Tomcat 3032. FMJ ammo is recommended by most users.<\/p>\n\n\n\n

Also, check to see whether your magazine is clean or not. Do not lubricate the magazine as it can collect more dirt.<\/p>\n\n\n\n

5. Broken Firing Pin:<\/h3>\n\n\n\n

The Beretta Tomcat 3032 is extremely affected by dry firing. It can easily cause the firing pin to break, and thus is greatly discouraged.<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n\n

One word of advice, you should never dry fire your Tomcat. One or two occasional fires won\u2019t do much harm, but it\u2019s still better to be on the safe side.<\/p>\n\n\n\n

You can get a replacement firing pin<\/a> for the Tomcat, which should fix the issue.<\/p>\n\n\n\n

6. Stovepiping:<\/h3>\n\n\n\n

The Beretta Tomcat 3032 can also face several stovepipes due to several reasons, such as a dirty gun, or JHP ammo.<\/p>\n\n\n\n

After prolonged usage, the gun can collect dirt and thus cause such issues. Hence it needs to be cleaned routinely.<\/p>\n\n\n\n

Solution:<\/h4>\n\n\n\n

Clean your gun routinely. The recommended cleaning routine should be once every 150 rounds.<\/p>\n\n\n\n

Mixing up FMJ ammo with JHP can also lock up the magazine and cause feeding issues and stovepipes. It is advised to stick to FMJ full-time.<\/p>\n\n\n\n

\n

User Feedback on Beretta Tomcat 3032<\/h2>\n\n\n\n

User feedback for the Beretta Tomcat 3032 is mixed to say at best.<\/p>\n\n\n\n

A single Google search will bring up numerous results regarding the fragile frame of the Tomcat. Such can be seen in this thread on the AR15 forum<\/a>.<\/p>\n\n\n\n

Another user complained about the stiff slides of the Tomcat on the Sh<\/a>ooters Forum<\/a>. But it is more of a feature than a problem.<\/p>\n\n\n\n

The same problem was brought up by another user on the Highroad<\/a> as well.<\/p>\n\n\n\n

Another user did claim that he had owned two Tomcats, and had never faced any issues regarding his Tomcat on a separate thread on the Shooters Forum<\/a>.<\/p>\n\n\n\n

An instance of the firing pin breaking due to dry-firing can be seen on this Reddit<\/a> thread. But it is a user error, to be honest.<\/p>\n<\/div><\/div>\n\n\n\n

\n