{"id":2232,"date":"2022-09-14T06:28:57","date_gmt":"2022-09-14T06:28:57","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=2232"},"modified":"2022-09-14T06:28:59","modified_gmt":"2022-09-14T06:28:59","slug":"ruger-556-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/ruger-556-problems\/","title":{"rendered":"4 Ruger 556 Problems That You Probably Didn\u2019t Know Before"},"content":{"rendered":"\n

To make this AR-15-style rifle affordable, Ruger had to compromise a few things. Hence, it is normal if you are experiencing some Ruger 556 problems previously mentioned by the users.<\/p>\n\n\n\n

Among the most common issues, problematic triggers, stuck bolt carriers, jamming, and feeding failure are worth your attention.<\/strong><\/p>\n\n\n\n

The solutions to the problems I have described in this article are to help you keep the gun smooth. Let\u2019s not waste any more time and get started. <\/p>\n\n\n\n

Features & Specifications of Ruger 556:<\/strong><\/p>\n\n\n\n

Barrel Length<\/strong><\/td>16.10″<\/td><\/tr>
Magazine Capacity<\/strong><\/td>30 rounds<\/td><\/tr>
Overall Length<\/strong><\/td>32.25″ – 35.50″<\/td><\/tr>
Caliber<\/strong><\/td>5.56 NATO<\/td><\/tr>
Twist Rate<\/strong><\/td>1:8″ RH<\/td><\/tr>
Rear Sight<\/strong><\/td>Adjustable Ruger\u00ae Rapid Deploy<\/td><\/tr>
Front Sight<\/strong><\/td>Adjustable Post<\/td><\/tr>
Safety<\/strong><\/td>Manual Switch<\/td><\/tr>
Weight<\/strong><\/td>6.5 lb.<\/td><\/tr>
Length of Pull<\/strong><\/td>10.25″ – 13.50″<\/td><\/tr>
Trigger Pull<\/strong><\/td>4.5 pound<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"Common
Ruger 556<\/figcaption><\/figure>\n\n\n\n

Common Ruger 556 Problems and Solutions<\/h2>\n\n\n\n
Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Trigger Malfunction<\/td>Replace the trigger pin, trigger spring, or the whole trigger assembly.<\/td><\/tr>
Jammed Bolt Carrier<\/td>Send the gun to Ruger, or try cleaning the gun.<\/td><\/tr>
Jamming<\/td>Clean the gun properly, replace the magazine and action spring, and change the ammo.<\/td><\/tr>
Feeding Failure<\/td>Try brass casing bullets, clean and lube the gun, or send it to Ruger.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Problematic Trigger<\/h3>\n\n\n\n

In this problem, the bolt stops from closing.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

From the nature of this Ruger AR-556 trigger problem, I can say that it is probably the cause of a half-cocked trigger.<\/p>\n\n\n\n

Studying this particular case, it has been clear that the pin holding the trigger in its position is gone. And the spring is also not its place.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

Replacing the trigger pin solves this issue. Also, if you find that the spring has become weak, you will have to change it too.<\/p>\n\n\n\n

But it is possible that you still are facing a similar issue. And, I am afraid you would have to replace the whole trigger assembly to fix it.<\/p>\n\n\n\n

If the gun is still under warranty, sending it back to Ruger will be the best thing to do.<\/p>\n\n\n\n

2. Jammed Bolt Carrier<\/h3>\n\n\n\n

Your AR556\u2019s bolt carrier may get suddenly locked back.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

This is the classic case of a very common Ruger AR-556 bolt catch problem. There are other symptoms too.<\/p>\n\n\n\n

After a careful inspection, some users have seen that the back of the gas key is wedging by slamming itself into the charging handle.<\/p>\n\n\n\n

Such situations occur due to the mishandling of the user.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

The best solution to this problem is to send the gun to Ruger if the firearm is still under warranty.<\/p>\n\n\n\n

But you can try cleaning the gun and testing whether the problem is still there or not.<\/p>\n\n\n\n

3. Jamming Issue<\/h3>\n\n\n\n

after jamming, you may notice that the target is off and there is a gouged casing.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

A Ruger AR-556 jamming problem can become serious as the ammo sometimes doesn\u2019t leave the gun. Here, you would see a bent bullet with a gouged casing.<\/p>\n\n\n\n

There are some possible reasons to explore before one sends the gun to Ruger.<\/p>\n\n\n\n

Check whether you are providing enough energy for proper cycling. Also, inspect the condition of the magazine and whether it is functioning properly.<\/p>\n\n\n\n

After that, check the strength of the action spring. Furthermore, out-of-spec ammo and wrong lubrication can cause this issue too.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

Once you have ensured that your actions have nothing wrong to cause this problem, you can move on to the next step.<\/p>\n\n\n\n

First of all, disassemble the rifle, and check the mentioned parts while cleaning them.<\/p>\n\n\n\n

Try changing the magazine, and action spring if necessary. It should improve the condition. <\/p>\n\n\n\n

Lastly, consult with an expert about the ammo brand and the lubrication you are using. <\/p>\n\n\n\n

4. Feeding Problem<\/h3>\n\n\n\n

Feeding failure is a problem that is directly connected to the ejection issue. Your AR556 rifle may have both extraction and feeding problems.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

The reason for Ruger AR-556 feeding problems is a few. Among them, not cleaning the gun and the wrong kind of ammo are the most common.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

First of all, you have to try the gun after cleaning and lubricating it properly. Also, try a different brand of ammunition.<\/p>\n\n\n\n

Pro Tip<\/em><\/strong>: Don\u2019t use steel case bullets in your AR as it gets stuck most of the time; a brass case is better. And, clean the gun following the instructions from your user manual.<\/em><\/p>\n\n\n\n

The extractor and the bolt come with packing grease from the factory. So, you need to clean them right after unboxing.<\/p>\n\n\n\n

\n