The solutions to the problems I have described in this article are to help you keep the gun smooth. Let\u2019s not waste any more time and get started. <\/p>\n\n\n\n
Features & Specifications of Ruger AR 556:<\/strong><\/p>\n\n\n\n In this problem, the bolt stops from closing.<\/p>\n\n\n\n From the nature of this Ruger AR-556 trigger problem, I can say that it is probably the cause of a half-cocked trigger.<\/p>\n\n\n\n Studying this particular case, it has been clear that the pin holding the trigger in its position is gone. And the spring is also not its place.<\/p>\n\n\n\n Replacing the trigger pin solves this issue. Also, if you find that the spring has become weak, you will have to change it too.<\/p>\n\n\n\n But it is possible that you still are facing a similar issue. And, I am afraid you would have to replace the whole trigger assembly to fix it.<\/p>\n\n\n\n If the gun is still under warranty, sending it back to Ruger will be the best thing to do.<\/p>\n\n\n\n Your AR556\u2019s bolt carrier may get suddenly locked back.<\/p>\n\n\n\n This is the classic case of a very common Ruger AR-556 bolt catch problem. There are other symptoms too.<\/p>\n\n\n\n After a careful inspection, some users have seen that the back of the gas key is wedging by slamming itself into the charging handle.<\/p>\n\n\n\n Such situations occur due to the mishandling of the user.<\/p>\n\n\n\n The best solution to this problem is to send the gun to Ruger if the firearm is still under warranty.<\/p>\n\n\n\n But you can try cleaning the gun and testing whether the problem is still there or not.<\/p>\n\n\n\n after jamming, you may notice that the target is off and there is a gouged casing.<\/p>\n\n\n\n A Ruger AR-556 jamming problem can become serious as the ammo sometimes doesn\u2019t leave the gun. Here, you would see a bent bullet with a gouged casing.<\/p>\n\n\n\n There are some possible reasons to explore before one sends the gun to Ruger.<\/p>\n\n\n\n Check whether you are providing enough energy for proper cycling. Also, inspect the condition of the magazine and whether it is functioning properly.<\/p>\n\n\n\n After that, check the strength of the action spring. Furthermore, out-of-spec ammo and wrong lubrication can cause this issue too.<\/p>\n\n\n\n Once you have ensured that your actions have nothing wrong to cause this problem, you can move on to the next step.<\/p>\n\n\n\n First of all, disassemble the rifle, and check the mentioned parts while cleaning them.<\/p>\n\n\n\n Try changing the magazine, and action spring if necessary. It should improve the condition. <\/p>\n\n\n\n Lastly, consult with an expert about the ammo brand and the lubrication you are using. <\/p>\n\n\n\n Feeding failure is a problem that is directly connected to the ejection issue. Your AR556 rifle may have both extraction and feeding problems.<\/p>\n\n\n\n The reason for Ruger AR-556 feeding problems is a few. Among them, not cleaning the gun and the wrong kind of ammo are the most common.<\/p>\n\n\n\n First of all, you have to try the gun after cleaning and lubricating it properly. Also, try a different brand of ammunition.<\/p>\n\n\n\n Pro Tip<\/em><\/strong>: Don\u2019t use steel case bullets in your AR as it gets stuck most of the time; a brass case is better. And, clean the gun following the instructions from your user manual.<\/em><\/p>\n\n\n\n The extractor and the bolt come with packing grease from the factory. So, you need to clean them right after unboxing.<\/p>\n\n\n\n Lightweight construction, great accuracy, and affordable pricing make the AR-556 a great entry-level firearm.<\/p>\n\n\n\n There are many reasons to like the Ruger AR556 rifle. A good trigger, accurate cold hammer forged barrel, and SL stock are a few among them<\/strong><\/a>.<\/p>\n\n\n\nBarrel Length<\/strong><\/td> 16.10″<\/td><\/tr> Magazine Capacity<\/strong><\/td> 30 rounds<\/td><\/tr> Overall Length<\/strong><\/td> 32.25″ – 35.50″<\/td><\/tr> Caliber<\/strong><\/td> 5.56 NATO<\/td><\/tr> Twist Rate<\/strong><\/td> 1:8″ RH<\/td><\/tr> Rear Sight<\/strong><\/td> Adjustable Ruger\u00ae Rapid Deploy<\/td><\/tr> Front Sight<\/strong><\/td> Adjustable Post<\/td><\/tr> Safety<\/strong><\/td> Manual Switch<\/td><\/tr> Weight<\/strong><\/td> 6.5 lb.<\/td><\/tr> Length of Pull<\/strong><\/td> 10.25″ – 13.50″<\/td><\/tr> Trigger Pull<\/strong><\/td> 4.5 pound<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n ![\"Common](\"https:\/\/gunanalyst.com\/wp-content\/uploads\/2022\/09\/Common-Difficulties-with-Ruger-AR-556-and-the-Solutions-1024x536.webp\")
Common Ruger 556 Problems and Solutions<\/h2>\n\n\n\n
Problems<\/strong><\/td> Solutions<\/strong><\/td><\/tr> Trigger Malfunction<\/td> Replace the trigger pin, trigger spring, or the whole trigger assembly.<\/td><\/tr> Jammed Bolt Carrier<\/td> Send the gun to Ruger, or try cleaning the gun.<\/td><\/tr> Jamming<\/td> Clean the gun properly, replace the magazine and action spring, and change the ammo.<\/td><\/tr> Feeding Failure<\/td> Try brass casing bullets, clean and lube the gun, or send it to Ruger.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n 1. Problematic Trigger<\/h3>\n\n\n\n
Possible Reasons<\/h4>\n\n\n\n
The Fix<\/h4>\n\n\n\n
2. Jammed Bolt Carrier<\/h3>\n\n\n\n
Possible Reasons<\/h4>\n\n\n\n
The Fix<\/h4>\n\n\n\n
3. Jamming Issue<\/h3>\n\n\n\n
Possible Reasons<\/h4>\n\n\n\n
The Fix<\/h4>\n\n\n\n
4. Feeding Problem<\/h3>\n\n\n\n
Possible Reasons<\/h4>\n\n\n\n
The Fix<\/h4>\n\n\n\n
User Feedback on Ruger 556<\/h2>\n\n\n\n