{"id":1504,"date":"2022-08-30T19:05:34","date_gmt":"2022-08-30T19:05:34","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=1504"},"modified":"2022-08-30T19:05:36","modified_gmt":"2022-08-30T19:05:36","slug":"ruger-security-9-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/ruger-security-9-problems\/","title":{"rendered":"5 Ruger Security 9 Problems That You Can\u2019t Ignore"},"content":{"rendered":"\n

Despite lots of interesting features and impressive stats, I have found several serious Ruger Security 9 problems.<\/p>\n\n\n\n

Among the common complaints, you should know the issues regarding jamming, stuck safety lever, feeding, extraction, and slide release.<\/strong><\/p>\n\n\n\n

But don\u2019t worry because I have also included the possible causes and fixes of these problems. Without further ado, let\u2019s get started.<\/p>\n\n\n\n

Features & Specifications of Ruger Security 9:<\/strong><\/p>\n\n\n\n

Barrel Length<\/strong><\/td>4″<\/td><\/tr>
Magazine Capacity<\/strong><\/td>15 rounds<\/td><\/tr>
Overall Length<\/strong><\/td>7.24″<\/td><\/tr>
Twist Rate<\/strong><\/td>1:10″ RH<\/td><\/tr>
Rear Sight<\/strong><\/td>Drift Adjustable<\/td><\/tr>
Front Sight<\/strong><\/td>Fixed<\/td><\/tr>
Safety<\/strong><\/td>Integrated trigger safety and external manual safety<\/td><\/tr>
Dimensions <\/strong><\/td>5″ H; 1.02″ W<\/td><\/tr>
Weight<\/strong><\/td>23.8 oz.<\/td><\/tr>
Trigger Pull<\/strong><\/td>5.5-6 lbs.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"Common
Ruger Security 9 Problems<\/figcaption><\/figure>\n\n\n\n

Common Ruger Security 9 Problems and Solutions<\/h2>\n\n\n\n
Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Jamming<\/td>Replace faulty springs, magazines, or extractors, and clean the gun.<\/td><\/tr>
Stuck Safety Lever<\/td>Send the gun to Ruger for fixing the safety lever.<\/td><\/tr>
Feeding Problem<\/td>Clean and lube the gun properly, replace the faulty extractor, or polish the feed ramp.<\/td><\/tr>
Extraction Problem<\/td>Change the ammo brand, clean the gun, and replace faulty or weak springs.<\/td><\/tr>
Stuck Slide<\/td>Trim the extra plastic material for the lever to act smoothly.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

1. Jamming Issue<\/h3>\n\n\n\n

When you say jamming, it may indicate several problems. The slide can get stuck, the fired shell may not eject, and so on.<\/p>\n\n\n\n

Possible Solutions<\/h4>\n\n\n\n

In a Ruger Security 9 jamming problem, you have to carefully detect the symptoms the gun is showing.<\/p>\n\n\n\n

Such jamming problems occur due to worn-out springs, faulty magazines, bad extractors, and problematic recoil springs.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

As a beginner, you have to learn how to assemble and disassemble the gun if you want to fix little problems by yourself.<\/p>\n\n\n\n

Here, you can check the condition of the springs by disassembling your firearm. After detecting which part is faulty, you can take action accordingly.<\/p>\n\n\n\n

In case of faulty springs, you have to replace them. I know that most of the users don\u2019t have the necessary tools to fix complex issues.<\/p>\n\n\n\n

Such situations require expert help. The last recommendation for solving the jamming issue is cleaning the lubricating gun.<\/p>\n\n\n\n

Here, you can watch this YouTube video<\/strong><\/a> to see how Ruger Security 9 cleaning is done properly.<\/p>\n\n\n\n

2. Stuck Safety Lever<\/h3>\n\n\n\n

The safety lever of a Security 9 pistol is usually very stiff. And, it can get stuck in some situations.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

Some users complain about Ruger Security 9 safety problems which can occur due to internal component failure.<\/p>\n\n\n\n

The external manual safety feature depends on some metal parts that can be worn out over time.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

The best solution for this problem is to send the gun to Ruger or a local gunsmith.<\/p>\n\n\n\n

All you can do is clean the gun and lubricate it properly. Sometimes, dirt can cause the lever to stick to a certain position or make the safety lever stiff.<\/p>\n\n\n\n

3. Feeding Failure<\/h3>\n\n\n\n

Some new Security 9 pistols fail to feed the ammo properly.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

You will be surprised to know that in most Ruger Security 9 feeding problems, the reason is not cleaning the gun after unboxing.<\/p>\n\n\n\n

Due to improper actions, it is possible that you have somehow bent the ejector preventing the fired shells from ejecting.<\/p>\n\n\n\n

Hence, the new ammo doesn\u2019t get fed. Also, having rough edges on the feed ramp can cause such problems.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

Those who do not have previous experience with guns must clean and lube the newly bought firearm.<\/p>\n\n\n\n

Assuming you have disassembled the gun to clean, I can say that you are halfway to solving this issue.<\/p>\n\n\n\n

Now, carefully inspect the extractor and feed ramp. Noticing any irregularities or rough surface area requires immediate action.<\/p>\n\n\n\n

If the ejector is bent, you will have to replace the part. And for feed ramp roughness, polish it with a Dremel bit.<\/p>\n\n\n\n

Don\u2019t remove any material accidentally while polishing because it can cause serious damage to the mechanism.<\/p>\n\n\n\n

4. Failure to Extract<\/h3>\n\n\n\n

Security 9 pistols usually don\u2019t fail to extract the fired shell. But some units can have this problem.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

In Ruger Security 9 extractor problems, the most common reason is a wrong ammo dimension.<\/p>\n\n\n\n

Due to high temperature, the shell expands slightly. When the dimensions don\u2019t match the recommendation, it fails to leave the extractor.<\/p>\n\n\n\n

Furthermore, if you don\u2019t clean the packing grease inside the cylinder, you will face similar problems.<\/p>\n\n\n\n

Lastly, don\u2019t forget to check out the strength of the extractor spring. Because a weak spring can cause this issue.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

First of all, change the ammo brand, and see whether the situation improves or not.<\/p>\n\n\n\n

In case the problem persists, you should try cleaning the gun.<\/p>\n\n\n\n

The reason I am saying this is because packaging grease and dirt buildup can cause the shells to stick to the cylinder.<\/p>\n\n\n\n

Lastly, replace the extractor spring if it has become weak or faulty.<\/p>\n\n\n\n

You may not find any online video showing how to do the replacement. However, there are plenty of assembly and disassembly videos<\/strong><\/a> of Ruger Security 9 pistol.<\/p>\n\n\n\n

5. Slide Release Problem<\/h3>\n\n\n\n

The slide of a security 9 getting stuck in the backward position is the nature of this problem.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

When you face a Ruger Security 9 slide release problem, you will first have to suspect additional material below the steel slide stop lever.<\/p>\n\n\n\n

You will notice that the raised outline on the frame is actually causing the whole issue.<\/p>\n\n\n\n

It prevents the lever from going all the way down.<\/p>\n\n\n\n

Apart from that, check the strength of the slide spring. Over time and use, it can get weak or worn out.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

I have seen slide release problems in other gun models. The probable causes and solutions are common.<\/p>\n\n\n\n

But this one is different. Several users have complained that their Security 9 pistols have bumps or extra polymer materials below the steel stile stop lever.<\/p>\n\n\n\n

One can easily take a utility knife and trim the additional bit so that the lever can go all the way down.<\/p>\n\n\n\n

Lastly, check the strength of the slide spring. If it is too weak or can\u2019t smoothen the slide release action, you will have to replace it with a new one.<\/p>\n\n\n\n

\n

User Feedback on Ruger Security 9<\/h2>\n\n\n\n

In the concealed carry firearm category, Ruger is a very popular and trusted name.<\/p>\n\n\n\n

The brand has lots of models including the Security 9 which is praised across the community.<\/p>\n\n\n\n

The size, shape, and balanced build make the gun stable. And, I think that you would love its less stiff recoil spring that ensures a smooth firing experience.<\/p>\n\n\n\n

However, you can\u2019t ignore the problems I have described above.<\/p>\n\n\n\n

Also, the aluminum side rail and thinner barrel construction compared to the competitors can be a deal-breaker to some people.<\/p>\n\n\n\n

Despite all those cons, you will find the list of pros is longer.<\/p>\n\n\n\n

Considering ergonomics, shooting, accuracy, carrying ability, and value for the money, reviewers rate it 4.3 out of 5.<\/em><\/p>\n<\/div><\/div>\n\n\n\n

\n