{"id":1236,"date":"2022-08-24T16:07:16","date_gmt":"2022-08-24T16:07:16","guid":{"rendered":"https:\/\/gunanalyst.com\/?p=1236"},"modified":"2023-03-13T01:27:48","modified_gmt":"2023-03-13T01:27:48","slug":"ruger-lcp-max-problems","status":"publish","type":"post","link":"https:\/\/gunanalyst.com\/ruger-lcp-max-problems\/","title":{"rendered":"5 Common Ruger LCP Max Problems that You Should Know About"},"content":{"rendered":"\n

A larger magazine capacity makes this version of LCP popular. However, there are some Ruger LCP Max problems that you should know about before making sudden decisions.<\/p>\n\n\n\n

Among all, improper chambering, jamming, faulty extraction, and rust problems are the most common complaints about Ruger LCP Max.<\/strong><\/p>\n\n\n\n

In this article, you will get to know about the possible reasons and fixes for these issues. So, let\u2019s get started.<\/p>\n\n\n\n

<\/p>\n\n\n\n\n\n

Features & Specifications of Ruger LCP Max:<\/strong><\/p>\n\n\n\n

Barrel Length<\/strong><\/td>2.80″<\/td><\/tr>
Magazine Capacity<\/strong><\/td>10 rounds<\/td><\/tr>
Overall Length<\/strong><\/td>5.17″<\/td><\/tr>
Caliber<\/strong><\/td>380 Auto<\/td><\/tr>
Twist Rate<\/strong><\/td>1:16″ RH<\/td><\/tr>
Rear Sight<\/strong><\/td>Drift Adjustable<\/td><\/tr>
Front Sight<\/strong><\/td>Tritium with White Outline<\/td><\/tr>
Safety<\/strong><\/td>Trigger Safety and Secure-Action<\/td><\/tr>
Dimensions <\/strong><\/td>4.12″ H; 0.81″ W<\/td><\/tr>
Weight<\/strong><\/td>10.6 oz.<\/td><\/tr>
Trigger Pull<\/strong><\/td>6 pounds<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"Common
ruger lcp max<\/figcaption><\/figure>\n\n\n\n

Common Ruger LCP Max Problems and Solutions<\/h2>\n\n\n\n

Before jumping right into the discussion, have a look at the table below for a quick overview.<\/p>\n\n\n\n

Quick Overview of the Problems and Solutions<\/strong><\/p>\n\n\n\n

Problems<\/strong><\/td>Solutions<\/strong><\/td><\/tr>
Chambering Issue<\/td>Avoid limp-wristing, change the recoil spring or polish the feed ramp.<\/td><\/tr>
Jamming Issue<\/td>Avoid limp-wristing, replace faulty springs, solve magazine irregularities, or polish the feed ramp.<\/td><\/tr>
Extraction Issue<\/td>Try different ammo brands, clean grease in the cylinder, or polish roughness.<\/td><\/tr>
Rust Issue<\/td>Clean the gun or send it to Ruger.<\/td><\/tr>
Magazine Issue<\/td>Try changing the magazine latch spring, and avoid hitting the mag button accidentally.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n\n\n

1. Chambering Problems<\/h3>\n\n\n\n

Failing to chamber a round causes the slide to be forced before shooting.<\/p>\n\n\n\n

It can happen sometimes even if some rounds are fired without any issues. The round does not sit properly, and one has to manually force it to be placed.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

Knowing the reasons first will help you solve this Ruger LCP Max chambering problem.<\/p>\n\n\n\n

The shape of the ammo is the first thing to check. Round-nosed bullets are recommended. Also, check whether the dimensions match the firearm\u2019s manual.<\/p>\n\n\n\n

Secondly, you have to inspect the feed ramp. Roughness often causes the slide to get stuck.<\/p>\n\n\n\n

Besides a bad feed ramp, a weak recoil spring can also cause this type of problem.<\/p>\n\n\n\n

Lastly, you may not be chambering the round properly. Pulling the slide and letting it go naturally should do the trick.<\/p>\n\n\n\n

But I have seen beginners do limp-wristing without realizing it.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

Before trying out the complex solutions, you first have to implement simpler fixes such as changing the ammo brand and avoiding limp-wristing<\/strong><\/a>.<\/p>\n\n\n\n

The next stop is disassembling the firearm and inspecting the feed ramp as well as the recoil spring.<\/p>\n\n\n\n

If the spring is weak, you will have to replace it with a new one.<\/p>\n\n\n\n

And, in the case where the feed ramp is not as smooth as expected, one needs to polish<\/strong> it.<\/p>\n\n\n\n

Assuming you already have a Dremel bit set, buying Flitz BU 03515 Polish Paste<\/strong><\/a> is all.<\/p>\n\n\n\n

2.  Jamming Issue<\/h3>\n\n\n\n

Failure to feed ammo is what I mean by Ruger LCP Max jamming issue.<\/p>\n\n\n\n

It prevents the bullet from chambering or leaving the magazine.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

Similar to the previous problem, jamming can occur due to limp-wristing and the wrong kind of ammunition.<\/p>\n\n\n\n

Furthermore, the bore, side barrel, and feed ramp can be rough causing the bullet to sit properly.<\/p>\n\n\n\n

In case, a faulty magazine fails to feed ammo, you may face this feeding or jamming problem.<\/p>\n\n\n\n


And, irregularities in the barrel like the image here can cause jamming too. You can see it by disassembling the gun.<\/p>\n\n\n\n

Source<\/em><\/strong>: https:\/\/www.rugerforum.net\/threads\/lcp-max-issues.402144\/post-4706526<\/em><\/a><\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

In the previous point, I have given the solution to limp-wristing and ammo brands.<\/p>\n\n\n\n

Also, you can get enough information on polishing the feed ramp in case it has considerable roughness.<\/p>\n\n\n\n

In such cases, the magazine spring becomes too tight causing the jamming or ammo feeding issue.<\/p>\n\n\n\n

So, the solution here is to replace the faulty spring. But other components inside the magazine can cause this problem.<\/p>\n\n\n\n

You should disassemble the magazine, and look for any irregularities.<\/p>\n\n\n\n

Due to having lots of similarities in the Ruger LCP Max magazine problem, I am not going to discuss it separately.<\/p>\n\n\n\n

The nature of the problem and solutions are very common to complaints regarding jamming.<\/p>\n\n\n\n

3. Failure to Extract<\/h3>\n\n\n\n

Failing to eject the fired case is the definition of a Ruger LCP Max extractor problem.<\/p>\n\n\n\n

It can either happen in a new LCP Max unit or a used one. I have seen users facing this issue even after shooting 200 rounds through their guns.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

Not-recommended ammunition is one of the biggest reasons for extraction failure. The slightly larger shell size prevents it from ejecting.<\/p>\n\n\n\n

Also, the grease inside the cylinder can cause the fired shell to bind.<\/p>\n\n\n\n

Lastly, irregularities in the chamber can also work behind ejection failure. However, the possibility of this reason is very low.<\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

First of all, try different ammo. I am saying this because the shell of some bullets can be slightly larger causing it to stick in the extractor.<\/p>\n\n\n\n

Furthermore, new units come with packaging grease to prevent rust.<\/p>\n\n\n\n

By cleaning the grease and ensuring the cylinder is bone dry, you will be able to solve the ejection problem.<\/p>\n\n\n\n

Lastly, disassemble the gun, and inspect the internal parts carefully to detect any kind of burr or roughness.<\/p>\n\n\n\n

Polishing is what one should do in this case.<\/p>\n\n\n\n\n\n

4. Rust Problem<\/h3>\n\n\n\n

If you have noticed rust in any part of the LCP Max, you will be surprised to know that you are not alone in this Ruger LCP Max rust problem.<\/p>\n\n\n\n

Regardless of new or old units, rust occurs for various reasons. In most cases, rust occurs in slide rails.<\/p>\n\n\n\n

Possible Reasons<\/h4>\n\n\n\n

First of all, poor material quality is the main reason for this kind of problem.<\/p>\n\n\n\n

Also, a bad finish and a cheap paint job may be the culprits for this problem.<\/p>\n\n\n\n

I have to admit that the users are also to be blamed. In case you leave the gun in rain, and do not clean properly afterward can introduce rust.  <\/p>\n\n\n\n

The Fix<\/h4>\n\n\n\n

If your LCP Max is still under warranty, sending the gun back to Ruger will be the best thing to do.<\/p>\n\n\n\n

Otherwise, you can follow the steps below to remove the rust by yourself.<\/p>\n\n\n\n